Replacement of rubber protective covers of the steering mechanism. BMW the 5th E28/E34 series (from 1981 to 1993 of release)
Repair of BMW E28 and series E34 from 1981 to 1993
1. Cars of the BMW brand of 5-series
2. Engine
3. Cooling system
4. Power supply system
5. Ignition system
6. Control systems of the engine and decrease in toxicity of the fulfilled gases
7. System of production of the fulfilled gases
8. Coupling
9. Manual box of gear shifting (RKPP) and automatic transmission (AT)
10. Transmission line
11. Steering and suspension bracket
11.1. Steering
11.1.1. General information
11.1.2. Removal and installation of tips of steering drafts
11.1.3. Replacement of rubber protective covers of the steering mechanism
11.1.4. Survey, removal and installation of a steering drive
11.1.5. Removal and installation of the steering mechanism
11.1.6. Removal and installation of the pump of the amplifier of a steering
11.1.7. Pumping of hydraulic system of the mechanism of hydrostrengthening of a wheel
11.1.8. Removal and installation of a steering wheel
11.1.9. General information on wheels and tires
11.1.10. General information on installation of corners of wheels and angles of rotation
11.1.11. Diagnostics of malfunctions of a suspension bracket and steering
11.2. Forward suspension bracket
11.3. Suspension bracket of back wheels
12. Brake system
13. Body
14. Control body sizes
15. Heater and air conditioner
16. System of onboard electric equipment
17. Routine maintenance of the car
18. Size table and adjusting data
19. Schematic electric circuits
20. Governing bodies and operation receptions
21. System of onboard diagnostics - a principle of functioning and codes of malfunctions
 













11-1-3-zamena-rezinovykh-zashhitnykh-chekhlov-rulevogo-mekhanizma.html

11.1.3. Replacement of rubber protective covers of the steering mechanism

 PERFORMANCE ORDER

  1. Remove tips of steering drafts (see. Section Removal and installation of tips of steering drafts).
  2. Cut clips on both ends of old covers and remove covers.
  3. While covers are removed, examine epiploons on the end of the steering mechanism. If they proceed, replace the steering mechanism.
  4. Put on new protective covers and establish new clips.
  5. Establish tips of steering drafts (see. Section Removal and installation of tips of steering drafts).


«on page back
11.1.2. Removal and installation of tips of steering drafts
on page forward»
11.1.4. Survey, removal and installation of a steering drive