Removal and installation of bumpers. BMW the 5th E28/E34 series (from 1981 to 1993 of release)
Repair of BMW E28 and series E34 from 1981 to 1993
1. Cars of the BMW brand of 5-series
2. Engine
3. Cooling system
4. Power supply system
5. Ignition system
6. Control systems of the engine and decrease in toxicity of the fulfilled gases
7. System of production of the fulfilled gases
8. Coupling
9. Manual box of gear shifting (RKPP) and automatic transmission (AT)
10. Transmission line
11. Steering and suspension bracket
12. Brake system
13. Body
13.1. Removal and front grille installation
13.2. Removal, installation and cowl adjustment
13.3. Removal and installation of bumpers
13.4. Removal and installation of the panel of an internal covering of doors
13.5. Removal, installation and door adjustment
13.6. Removal, installation and adjustment of a trunk lid / door of a back
13.7. Removal, installation and adjustment of a latch, cylinder of the lock and door handles
13.8. Removal and installation of glass of a door
13.9. Removal and installation of a window regulator of a door
13.10. Removal and installation of an external mirror
13.11. Removal and installation of casings of a steering column
13.12. Removal and installation of seats
13.13. Check of seat belts
13.14. Care of the car and coloring
14. Control body sizes
15. Heater and air conditioner
16. System of onboard electric equipment
17. Routine maintenance of the car
18. Size table and adjusting data
19. Schematic electric circuits
20. Governing bodies and operation receptions
21. System of onboard diagnostics - a principle of functioning and codes of malfunctions
 













13-3-snyatie-i-ustanovka-bamperov.html

13.3. Removal and installation of bumpers

Removal

 PERFORMANCE ORDER

  1. Uncover a bumper (if it is) and where it is necessary, a forward spoiler.
  2. Disconnect all conducting and other components which can prevent at bumper removal.
  3. Prop up a bumper a jack or an axial support. It is possible also to ask to support the assistant a bumper during return of bolts.
  4. Give fixing bolts and remove a bumper.

Installation

Installation make upside-down. Reliably tighten fixing bolts, then establish a cover of a bumper and all other components removed earlier.


«on page back
13.2. Removal, installation and cowl adjustment
on page forward»
13.4. Removal and installation of the panel of an internal covering of doors