Removal and инсталляция of the inlet трубопровод. BMW the 5th E28 / E34 series (from 1981 т. 1993 of релиз)
Repair of BMW E28 and series E34 from 1981 т. 1993
1. Автомобили of the пожар BMW of 5-series
2. Ядро
2.1. The repair work which is камыш автомобиля вне моды without extraction of the ядро from the автомобиль
2.1.1. Генерал информатион
2.1.2. Reduction of the звук пи of the вершину cylinder в the комиссионный сбор of the топ dead пункт (VMT)
2.1.3. Removal and инсталляция of a покрышку of a head of cylinders
2.1.4. Removal and инсталляция of the inlet трубопровод
2.1.5. Removal and инсталляция of a финально collector
2.1.6. Removal and инсталляция of покрышки of a распределительный chain
2.1.7. Removal, survey and инсталляция of a распределительный chain and asterisks of its natyazhitel
2.1.8. Removal and инсталляция of покрышки of a распределительный belt
2.1.9. Removal, survey and инсталляция of a распределительный belt and asterisks of its natyazhitel
2.1.10. Replacement of нападающего epiploons
2.1.11. Removal and инсталляция of a head of cylinders
2.1.12. Removal and инсталляция of the pallet of a case
2.1.13. Removal, проверяй of условно and инсталляция of the oil откачивай
2.1.14. Removal and flywheel инсталляцию / driving disk
2.1.15. Replacement of a жарься epiploon of a cranked shaft
2.1.16. Проверка of условно and replacement of поддержку of the силу unit
2.2. Procedures of майора maintenance of components of the ядро
3. Cooling система
4. Сила supply систему
5. Ignition система
6. Control системы of the ядро and decrease в toxicity of the fulfilled газа
7. Система of production of the fulfilled газа
8. Coupling
9. Справочник боксируй of gear shifting (RKPP) and automatic трансмиссия (AT)
10. Трансмиссия Лину
11. Проверили бы Steering and временное прекращение
12. Жердь систему
13. Body
14. Control body sizes
15. Heater and поведение conditioner
16. Система of onboard electric оборудование
17. Навык maintenance of the автомобиль
18. Size table and adjusting data
19. Schematic electric circuits
20. Governing bodies and операция receptions
21. Система of onboard diagnostics - a principle of functioning and коды of malfunctions
 













2-1-4-snyatie-i-ustanovka-vpusknogo-truboprovoda.html

2.1.4. Removal and инсталляция of the inlet трубопровод

Removal

Let's тонна the ядра классно completely, then зарывайся носом pressure в fuel системе for ядра with систему of injection of fuel (see. Head сила supply систему).

Disconnect a отрицательный wire of the battery.

ИФ the радио receiver of your автомобиль is equipped with систему of protection against theft, make суру действовало you gathered the correct код before a battery detachment.


ИФ задний проход connection of the battery of в inscription on в инструменте guard appeared в действовало language, address тонна the Section система of protection of в аудиосистеме from theft and language of в инструменте guard where procedure of инсталляцию of the necessary language is described.


 ПРОИЗВОДИТЕЛЬНОСТЬ ЧИН

  1. Merge в ядре более классно (see. Head навык maintenance of the автомобиль) тонна уровня below the inlet трубопровод. ИФ в a good condition, it it хочет possible тонн use a более классно again.
  2. On ядра with систему of injection of fuel weaken a collar of a брюки and disconnect a big inlet поведение брюки from the butterfly valve case. It is possible делал it is required тонна remove всех assembly of в поведении purifier / в inlet брюках тонну релиза more place for work (сантиметр Head the сила supply систему).
  3. On ядра of ворота бура автомобиля типизировал бы completely remove поведение purifier assembly (see. Head сила supply систему).
  4. Disconnect hoses of систему of cooling from the case throttle заслонки / the inlet трубопровод действовал is provided.
  5. Disconnect a cable of a butterfly valve and ИФ it is provided, a драйв cable темпостата (see. Head сила supply систему).
  6. Remove the valve and the Лина of систему of a retsirkulyatsiya of the fulfilled газа where it is provided (see. Head of the Control система of the ядро and decrease в toxicity of the fulfilled газа).
  1. At this stage on M40 ядра it is necessary тонна remove the топ part of the inlet трубопровод, having given bolts and nuts. Remove laying.
  1. On ядра with систему of injection of fuel disconnect a vacuum брюки from a регулирующий фактор of pressure of fuel and disconnect electric sockets from fuel nozzles (see. Head сила supply систему).
  1. Disconnect Лины of supply of fuel from the fuel highway or the ворота бура автомобиля действовал is provided (see. Head сила supply систему).
  1. On M40 ядра отболтите remove a язык программирования БЭЙСИК проверили бы from the lower part of the inlet трубопровод.
  2. Disconnect все remained hoses and wires between assembly of the inlet трубопровод / case of a butterfly valve and the ядро or the шасси.
  3. Give bolts and / or nuts of fastening of the трубопровод тонна a head of cylinders by means of a replaceable head, a ratchet and a long collar (M20 ядра).
  4. Begin with the ends move тонны the middle, releasing each шпунт в занимайся гимнастикой gradually, achieving делал it что possible тонны give them a hand. At removal of fixture поддержку the трубопровод действовал it did падай.

The трубопровод can removed, without removing the case of a butterfly valve, nozzles, vacuum / thermovalves, a регулирующий фактор of pressure of fuel or the ворота бура автомобиля. ИФ you establish the new трубопровод, трансферт весь тезис components (see. Head the сила supply систему) on the new трубопровод before its инсталляцию on a head of cylinders.


  1. Move the трубопровод up and тонна destroy laying hermetic, then remove it from a head and задний проход действовал remove laying.
 
 

Инсталляция

 ПРОИЗВОДИТЕЛЬНОСТЬ ЧИН

  1. Remove old laying, then carefully scratch вне моды from interfaced surfaces of the трубопровод and a head всех traces of a материал of old laying. very careful тонна damage and тонна scratch софт aluminum surfaces. On sale there ары специально solvents for removal of laying. Make сура действовал surfaces absolutely чистые and ары франко fat.
  2. Проверка the трубопровод on existence of traces of corrosion (where паспорт a более классно), мастера спорта, deformations and other damages. Мастера спорта and deformations usually appear near a laying surface, round openings for screws of adjustment of a gap. ИФ similar defects ары found, give the трубопровод тонна repair (or replace ИФ necessary).
  3. At трубопровод инсталляцию always use new laying. Where one вечеринка of laying has a графит surface, it should turned тонна a head of cylinders.
  4. Get nuts and bolts and tighten them gradually, beginning from the центр and moving by the ends, achieving demanded effort.
  5. The остаток of procedure of инсталляцию make аса it should, the возвращаются тонны removal. On M40 ядра replace laying between the топ and bottom партии of the трубопровод.


«on посыльного жарься
2.1.3. Removal and инсталляция of a покрышку of a head of cylinders
on посыльного нападающего»
2.1.5. Removal and инсталляция of a финально collector