11-2-7-snyatie-i-ustanovka-sborki-perednejj-stupicy-i-podshipnika.html
11.2.7. Removal and инсталляция of assembly of a нападающего nave and bearing
|
Removal of assembly of a нападающего nave and the bearing дремли it unsuitable for the subsequent application. Assembly хочет need new assembly.
|
Removal
|
- the автомобиль and reliably establish it on работает принудительно of у релиза bolts of fastening of wheels, then поддомкратьте a на одной оси поддержку. Give bolts of fastening of wheels and remove a wheel.
|
- By means of a молот and a chisel remove a dustproof cap from a nave.
|
|
- Тонна Rasklinta nave шпунт.
|
- Establish a wheel and lower the автомобиль on the earth. Релиз, but чет. remove a nave шпунт.
|
Always релиз and tighten a nave шпунт only at the автомобиль lowered on the earth. The effort necessary for untwisting of this шпунт (which it is tightened very hardly), can падай the автомобиль from на одной оси поддержку. |
|
- Тонна Poddomkratta a работает принудительно of the автомобиль and reliably establish it on на одной оси поддержку. Remove once again a нападающего wheel.
|
- Remove a поддержку of the нападающего жердь mechanism and its фиксацию бедно (see. Head жердь систему). It is obligatory тонна disconnect a жердь брюки. Suspend a поддержку aside on a piece of a wire действовал it did disturb work.
- Remove a жердь disk (see. Head жердь систему).
|
- Give a шпунт of a nave and греби together nave and bearing assembly from a rotary пин. ИФ it became attached, you can beat вне моды it.
|
- ИФ the internal более мило of the bearing remained on a rotary пин (согласно sometimes куску), remove a dustproof покрышку behind the bearing and by means of a стриптизера remove в internal более мило.
|
|
Инсталляция
|
- Establish a new dustproof покрышку.
|
- Get a new nave and the bearing on a rotary пин. ИФ it is necessary тонна make effort, выжимай only on в internal более мило of the bearing.
|
- Get a new шпунт of a nave and tighten it while палец.
- Establish a жердь disk, its zenkovanny фиксацию screw and a жердь поддержку (see. Head жердь систему).
- Establish a wheel and lower the автомобиль on the earth.
- Tighten a nave шпунт with demanded effort. Чет. forget тонна make it at the автомобиль lowered on the earth, instead of on на одной оси поддержку.
- Тонна Poddomkratta a работает принудительно of the автомобиль and reliably establish it on на одной оси поддержку. Remove a wheel.
- Insert a шпунт collar into a хлынул бы on в axis.
- Put suitable hermetic on a new dustproof cap and get a cap by means of a kiyanka with софт the brisk.
- Establish a wheel and bolts of fastening of wheels. Lower the автомобиль on the earth and tighten bolts of fastening of wheels with demanded effort.
|
|
|
|