8-3-snyatie-i-ustanovka-glavnogo-cilindra-scepleniya.html
8.3. Removal and инсталляция of the Майн cylinder of coupling
|
Hydraulic ликвидное is poisonous. It завивай dissolves paint. careful, чет. allow ликвидное хит on open сайтам of a body or в eyes. Мило near at hand rags for collecting the poured ликвидное, and в case of хит it on the painted surfaces immediately wash away ликвидное plentiful amount of cold water. |
Removal
|
- Не покрышка the заправляйся with жердь ликвидное (for модели with left foreign менеджмент) or the заправляйся with hydraulic ликвидное of coupling (for модели with right руку менеджмент) and by means of a syringe remove ликвидное from the заправляйся. On модели with left foreign менеджмент Уровень of ликвидное should lower than connection of the жердь Лину with the Майн cylinder.
- On модели with right руку менеджмент disconnect a hydraulic брюки from the lower part of the заправляйся and merge the remained ликвидное.
- Give a connecting шпунт and disconnect the союз of the hydraulic Лину of coupling from a нападающего part of the Майн cylinder.
|
- Working under the dashboard, remove the bottom panel of a covering from the driver (see. Head Body). Give a стучит of fastening of a pusher of the Майн cylinder of coupling тонна a coupling педаль.
|
- Give two bolts of fastening of the Майн cylinder тонн в бедно of a педаль of coupling, disconnect a hydraulic брюки from the топ part of the Майн cylinder and remove the Майн cylinder. Кип в readiness rags for collecting the poured ликвидное.
|
|
Инсталляция
|
|