Governing bodies and operation receptions. BMW the 5th E28/E34 series (from 1981 to 1993 of release)
Repair of BMW E28 and series E34 from 1981 to 1993
1. Cars of the BMW brand of 5-series
2. Engine
3. Cooling system
4. Power supply system
5. Ignition system
6. Control systems of the engine and decrease in toxicity of the fulfilled gases
7. System of production of the fulfilled gases
8. Coupling
9. Manual box of gear shifting (RKPP) and automatic transmission (AT)
10. Transmission line
11. Steering and suspension bracket
12. Brake system
13. Body
14. Control body sizes
15. Heater and air conditioner
16. System of onboard electric equipment
17. Routine maintenance of the car
18. Size table and adjusting data
19. Schematic electric circuits
20. Governing bodies and operation receptions
21. System of onboard diagnostics - a principle of functioning and codes of malfunctions
 






Взято тут technograd-spb.com







20-organy-upravleniya-i-priemy-ehkspluatacii.html

20. Governing bodies and operation receptions

Main governing bodies

1 — the Switch of external lighting
2 — the Lever of the switch of indexes of turn, lay onboard fires, a passing beam and a signal of a driving beam of headlights
3 — Switches of fog lights
4 — the Lever of the switch of stekloomyvatel and screen wipers

5 — the Switch of the alarm light system
6 — the Switch of heating of back glass
7 — the Lever of change of provision of a steering column

Control panel

1 — the Index of level of fuel with a control lamp of a reserve of fuel
2 — the Speedometer
3 — Control lamps of inclusion of indexes of turn, a driving beam and inclusion of indexes of turn of the trailer
4 — the Tachometer and эконометр
5 — the Index of temperature of cooling liquid
6 — Control lamps of pressure of oil, anti-blocking system of brakes (ABS), safety cushions, alarm systems of an emergency condition of working brake system, wear of brake slips and turning on of the parking brake
7 — the Index of a position of a control lever automatic transmission, modes

driving, control lamp of an electronic control system of AT
8 — the Counter of the general run and a measuring instrument of the passable way from the moment of dumping, and also indication of intervals of maintenance
9 — the Button of dumping of a measuring instrument of the passable way
10 — Control lamps of inclusion of fog lights and back foggy fires, and also a control lamp of a charge of the storage battery:

  • on BMW 525tds in addition: control lamp of system of electronic injection, and also control lamp of time of preheat.

Instrument доска*

1 — the Index of level of fuel with a control lamp of a reserve of fuel
2 — the Speedometer
3 — Control lamps of inclusion of indexes of turn, a driving beam and inclusion of indexes of turn of the trailer
4 — the Tachometer and эконометр
5 — the Index of temperature of cooling liquid
6 — Control lamps of turning on of the parking brake, a hydraulic drive of working brake system, anti-blocking system of brakes (ABS), safety cushions
7 — the Button of the display of self-diagnostics.
8 — the Index of a position of a control lever of automatic transmission, movement modes

9 — the Indicator of the display of self-diagnostics
10 — the Control lamp of pressure of oil, and also a control lamp of inclusion of A5C T system or electronic anti-blocking system BMW 525iX
11 — Indication of intervals of maintenance
12 — the Counter of the general run and a measuring instrument of the passable way from the moment of dumping
13 — the Button of dumping of a measuring instrument of the passable way
14 — the Control lamp of a charge of the storage battery, and also control lamps of inclusion of fog lights and back foggy fires

Fuel filling

Open a stopper of a fuel tank for what rotate it counter-clockwise and then remove.

Again to close a stopper of a fuel tank, put on it a mouth and screw up against the stop rotation clockwise before click (a bayonet lock).

Address with fuel carefully and observe the corresponding safety regulations.

Opening of a cover of the hatch of a fuel tank at refusal of automatic system of the central blocking of locks:

  • raise a luggage carrier rug on the right;
  • remove a covering on the right side;
  • wring out back a blocking core.

BMW Touring:

  • open a cover of a lateral covering of a cargo compartment on the right;
  • pull back the button with a symbol of a fuel column.

Keys

And. Main keys

  • Main key; with illumination (inclusion by pressing a BMW symbol)
  • Second key
  • Reserve key for storage in a reliable place, for example, in a purse

V.Klyuch for doors and the ignition lock

Does not approach to locks of a luggage carrier and a ware box.

Manufacturing of a new key

Number of a key is set in a stroke - a code on самоклеющейся to the plate. The request to store in reliable places.

Main natural illumination

When easing force of light replace a battery, do not allow an electrolit exit in a nest of a feeding element. - Battery replacement - see an illustration.

The request to hand over the fulfilled batteries on the special national teams пункты* or on the BMW service.

Automatic system of the central blocking замков*

At the closed forward doors the luggage carrier, doors and a folding cover of a fuel tank are deblocked and blocked by means:

  • key turn in the door lock, or
  • button movings - a clamp on one of forward doors, or
  • key turn in the luggage carrier lock, they can be deblocked also by handles of the forward doors being over armrests.

In order to avoid casual locking of doors it is provided that:

  • at an open door of the driver you cannot drown the button - a clamp;
  • the button - a clamp of a forward right door puts in action automatic system of uniform blocking of locks only if both forward doors are closed.

At failure the system of uniform blocking of locks is deblocked automatically.

Besides, in this case on separate options of executions the system of the alarm light system and internal illumination of salon join.

Anticreeping device / Anticreeping сигнализация*

It is put in action via the door lock.

The key can be taken out only in vertical situation.

At the switched-on anti-theft device the car cannot be opened, extending one of buttons - clamps of doors.

The anti-theft device not to turn on, if in the car there are passengers since in this case to open doors from within it is impossible.

Automatic closing of windows also is shifted - the lifted hatch with the electric drive - at the closed door turn a key in the situation corresponding to turning on of the anti-theft device and hold him in this situation. At return of a key to a starting position movement of windows or the hatch stops.

Emergency using (at defect in an electric chain)

At key turn in one of door locks clockwise or against against the stop corresponding door it is blocked or it is respectively deblocked.

Opening of doors outside - raise the corresponding door handle.

Heating of the lock of a door водителя* - raise the handle of a door of the driver for some seconds - heating will join. With a view of economy of the electric power time of heating is regulated automatically.

Opening of doors from within - pull on itself the handle of opening of the door, located over an armrest.

Children who have remained in the car can lock doors from within. Therefore do not forget to take out and take with itself automobile naturals to have external access to the car at any time.

Luggage carrier

Only the main key approaches to the lock of a luggage carrier.

Automatic system of uniform blocking of locks (at the switched-off anti-theft device)

Blocking багажника* (the main key extend in horizontal situation).

Thus unauthorized access to a luggage carrier is prevented by key transfer In (a key from doors and the ignition lock) to extraneous persons - it is useful to you, for example, in hotel or a workshop (it does not belong to cars with the device for a through arrangement of cargo).

The luggage carrier at the switched-on anti-theft device can be is opened by the main key, however, after closing should to be blocked again.

Illumination of a luggage carrier

Burns at an open trunk lid.

For fastening luggage сеток* or coupling tapes for luggage fixing at the bottom of a luggage carrier there are special loops.

For fixing of small luggage use elastic лентами* on a luggage carrier rug.

Zakhvatny dredging at the left near the locking mechanism facilitates moving of an open trunk lid down.

Deblokirovka of a folding cover of a fuel tank at refusal of automatic system of uniform blocking of locks:

  • raise a luggage carrier rug on the right;
  • remove a covering on the right side;
  • wring out back a blocking core (shooter).

"Children's safety lock" - a stopper of locks of a lobby right and back doors
 

The main key insert into a groove and turn in the direction from salon - now the corresponding door can be open only outside.

Remote control with infra-red передатчиком*

The transmitter direct on the receiver located under an internal rear-view mirror (the maximum distance of 5 meters), thus avoid a zateneniye of beams.

Opening - press the button 1 - the light-emitting diode (4) flashes;

  • are deblocked automatic system of uniform blocking of locks and the anticreeping system is disconnected;
  • the anticreeping alarm system is disconnected;
  • internal lighting joins.

Automatic opening - if you want to open windows, and also is shifted - the lifted hatch, continue to press the button. Through прибл. 2 seconds they will start to open, the light-emitting diode blinks. If the button to release, process of opening interrupts.

Closing - press the button 2

  • the light-emitting diode flashes;
  • the automatic system of the central blocking of locks works.

Blocking - press the button 3, not later than in 15 seconds after button 2 pressing

  • the light-emitting diode flashes;
  • the anticreeping system joins;
  • the anticreeping alarm system is activated.

Shutdown of the sensor of the anticreeping alarm system working on change of a tilt angle of the car - after blocking press repeatedly the button 1.

Automatic closing - for closing of windows, and also is shifted - the lifted hatch press the button 2. Through прибл. 2 seconds they will start moving, the light-emitting diode blinks. If the button to release, closing process will interrupt at once.

If you casually released the button 2 to continue closing press the button once again, release, press again and hold in this situation.

Main key

The key in the infra-red transmitter is the main key. All functions of remote control can be duplicated by usual keys.

Batteries - replace, if the light-emitting diode by pressing one of buttons does not flash and locks do not work.

Raise a cover for dredging by means of a screw-driver (shooter).

Unscrew the screw (shooter) and uncover.

The type of a battery and its situation at installation are represented at the bottom of the corresponding nest.

Use only batteries of the specified type.

Restoration of function of the transmitter

After replacement of a battery it is necessary to restore function of remote control of the transmitter (it it is not required if it proceeded less than one minute and at this time was not pressed any of buttons). The same needs to be made in case you received the new transmitter (for example, at replacement defective):

  • close a door of the driver, turn a key in the ignition lock on Max. 5 seconds in situation 1 also return again in situation 0;
  • press the button 1 (see an illustration) on the transmitter and hold her in this situation. Press three times in a row within 10 seconds the button 2; thus the button 1 do not release.
  • release the button 1, the light-emitting diode will slowly blink during Max. 10 seconds;
  • bring the transmitter to the receiver located under an internal rear-view mirror (whenever possible, it is close, maximum on 15 cm) and press one of кнопо;
  • the automatic system of uniform blocking of locks works — there is a blocking and an instant deblokirovka of locks that testifies that function of the transmitter was successfully restored.

If light-emitting diodes do not blink and the automatic system of uniform blocking of locks does not work, all process is necessary for repeating again.

If you have additional transmitters for your car, you within 30 seconds should restore their functions (in total to four transmitters). Thus, the lock of a shaft of a steering wheel should remain untouched.

If one of transmitters failed, you can get spare on the BMW service.

Just as manufacturing of a copy of each key is possible, precisely the signal of the infra-red transmitter also can be copied. The code of a signal which is automatically changing after each using, and also possibility of repeated restoration of function provide the maximum guarantee against abuses. Nevertheless, let's to strangers use the infra-red transmitter.

Сиденья*

Regulation of provision of seats in the longitudinal direction

Pull the lever (1), a seat move in demanded situation.

Having released the lever, pay attention to that worked a clamp.

Regulation of an inclination of a seat (only seat of the driver)

Pull the lever (2), establish the necessary height.

Sports сиденье*

Additional regulation of a femoral support with the help a makhovichka, the seat located in front sideways on a frame.

Regulation of provision of a back of a seat

Pull the lever (1), increasing or reducing load of a seat back, establish it in the necessary situation.

Regulation of provision of a seat on height

Pull the lever (2), increasing or reducing load of a seat, establish it in the necessary situation.

Seat of the driver during movement do not rearrange. At sharp moving of a seat it is possible to lose control over the car that will lead to failure. The passenger sitting near the driver, during movement should not throw back completely a seat back back.


For unloading of intervertebral disks sit down more deeply in a seat and all back completely lean on a seat back. At ideal landing the head forms one straight line with a backbone.

At trips on a long distance for unloading of muscles of a back it is possible to cast away a back of a seat more than the usual. However, possibility to rotate a wheel slightly bent hands thus should remain.

Head restraints forward and задние*

Head restraints are regulated on height by their pulling upward or an utaplivaniye down.

Turning head restraints you can regulate their inclination.

At failure head restraints reduce danger of damage of cervical department of a backbone. The middle of a head restraint should be приблизительн it to height of ears.

Automatic control of provision of lobbies сидений*

1 — Regulation of a tilt angle of seats
2 — Regulation of provision of seats in the longitudinal direction
3 — Regulation of provision of seats on height
4 — Regulation of provision of backs of seats
5 — Regulation of head restraints on height

Sports сиденье*

Additional regulation of a femoral support by means of movement ravnoplechy a rychazhka, located on a frame from the outer side of a seat (the switch A on an illustration is lower).

Storing of provisions of seats, mirrors and helmsman колеса*

Programming and call of three various provisions of a seat, external rear-view mirrors and the helmsman колеса* are possible.

Programming - since the provision of a key in the lock of ignition 1:

  • establish the desirable provision of a seat, external rear-view mirrors and a steering wheel;
  • press the button of memory of MEMORY: the control lamp signals readiness of system;
  • press the button 1, 2 or 3, the control lamp will go out.

Call

The door of the driver is open or closed, included automatic system of illumination of salon or a key in the lock of ignition will turn in situation 1:

  • press shortly the button 1, 2, or 3.

If you press the switch of regulation of a seat or a mirror or the memory button, regulation process will interrupt at once.

The door of the driver is closed, and a key or will extend or will turn in the ignition lock in situation 0 or 2:

  • the button 1, 2 or 3 hold pressed until regulation process will end.

Inclination of the right mirror

Establish the mirror switch in situation "Mirror of the driver":

At inclusion of a backing or control lever moving by an automatic transmission to situation R the mirror changes the situation so that for example at a parking, the bottom near zone of the car (an edge of a bordyurny stone) was in the field of vision.

You can switch off also this automatic system - for this purpose the switch of a mirror establish in situation "Mirror of the passenger".

Support of lumbar department of a backbone of a seat водителя*

The rychazhka, located on a frame from the interior of a seat is regulated as required by means of movement ravnoplechy.

By means of this device the contour of a back of a seat thanks to what the additional support for lumbar department of a backbone is created can change.

The top crest of a podvzdoshny bone and backbone are propped up, i.e. maintenance of a straight line and the weakened bearing is provided when sitting.

Electric drive back подголовников*

If the passenger on a back seat is fastened by a seat belt, the corresponding head restraint is automatically put forward.

For regulation of height use a ravnoplechy rychazhok.

Change of provision of a column of the helmsman колеса*

Cast away tightening the lever:

  • establish a steering wheel by means of its longitudinal movement on itself or from itself according to a seat position;
  • return tightening the lever in a starting position.

Do not change the provision of a column of a steering wheel during movement - there is a danger of failure.

Automatic change of position of the helmsman колеса*

The provision of a steering wheel can be regulated in the longitudinal direction and on height *, according to the direction of movement of the lever.

Do not change the provision of a steering wheel during movement - there is a danger of failure.

Input of a position of a steering wheel in memory - see. Storing of provisions of seats, mirrors and helmsman колеса*.

Automatic change of position of the helmsman колеса* (only together with regulation on height)

It was more convenient to you to get into the car and leave the car, the steering wheel automatically moves to the top position, if:

  • key in the lock of ignition will turn in situation 0;
  • the key in the lock of ignition is in situation 1 and the door of the driver opens;
  • the key in the lock of ignition is in situation 2, the parking brake will tighten and the door of the driver opens.

The steering wheel moves to the position fixed in memory, if:

  • the key in the lock of ignition is in situation 2 and at an open door of the driver the parking brake is released;
  • the key in the lock of ignition is in situation 2, the parking brake will tighten and the door of the driver is closed.

Sound signal

Press one of keys.

The device for a through arrangement груза*

The back seat is divided into two parts concerning 1/3 to 2/3. For loading of large-sized subjects of a pillow and a back (backs) of seats can lean back.

Pull for a loop a pillow of a seat and establish vertically, if necessary, move a little forward a forward seat.

The back of a back seat is automatically deblocked and it can be cast away forward.

External angular parts of basic pillows are motionless.

Before it extend breakthrough head restraints *, having inclined for this purpose if it is necessary, a seat.

The head restraint can be postponed in space between the back cast away forward and a door.

If you unintentionally blocked a seat back, press the lever (shooter) - having released the lever you deblock a back.

If necessary, pillows of seats can be dismantled. For this purpose establish them vertically, compress deblocking rychazhka and extend upward. At installation arrive in return sequence.

If you want to have enough place for loading of large-sized subjects, for this purpose move forward the right forward seat, extend a head restraint (a head restraint with an electric drive - breakthrough) and cast away a seat back.

For head restraint fixing with an electric drive at repeated installation press it with force.

After dismantle of a pillow of a seat turn upward an arm (shooter) and fix a red latch of a back of a seat in an arm finger.

Before installation of a pillow of a seat cast away an arm down!

The request to watch that cargo was reliably fixed and could not move during movement; during the braking and maneuvers there should not be a danger to passengers.

For ensuring the correct functioning of seat belts at installation of a back of a seat in a starting position watch that up to the end worked a clamp. The red latch (arrow) should move thus down.

At an unrecorded back of a seat the seat belt is not extended.

BMW Touring

Folding back of a back seat

The back of a back seat is divided into two parts concerning 1/3 to 2/3. For an otkidyvaniye press the button (from above) and lay down completely a back.

For a reset again press the button.

Protective shtorka of a cargo compartment

Extend shtorka and fix them behind.

The cartridge with shtorka can be dismantled. For this purpose press buttons from both parties and take out the cartridge.

For repeated installation the cartridge simply press into fastenings.

Dividing grid cargo отсека*

Extend a grid from a most top part of a back of a seat, move apart for full width a fixing level and hang up it on holders.

At will, instead of bigger you can extend a smaller part of a grid and hang up on a fixing level.

Holders of fixing levels are available both for cast away, and for being in the vertical provision of backs of back seats.

Folding covers at the bottom of a cargo compartment

Opening - press behind deepening for capture and cast away upward a cover.

Under a forward folding cover are: an automobile jack, a key for bolts of fastening of wheels, a persistent wedge, a head for "sekretok" of wheels *, a six-sided key for a protective cover of bolts of fastening of wheels *, and also a spherical head for towing устройства*.

Under a back folding cover are: a spare wheel and boxing with compartments.

The lateral covering of a cargo compartment of a body - opens in pressing the deblocking button in the left top corner of a covering.

Additional розетка*

In the left back corner of a cargo compartment under a covering.

It can be used as the socket for electrodevices in capacity to прибл. 280 W at tension of 12 Century.

Do not damage a cartridge - insert only the suitable tip!

Seat belts

Be fastened by seat belts at each trip.

The seat belt lock, at a zastegivaniye, should work with obviously heard click.

Otstegivaniye of a belt - press the red button in the lock and, slightly directing a belt, submit it to the automatic involving device.

Seat belt fasten without a perekruchivaniye and pull through hips and a shoulder. Thus, do not impose it on rigid or fragile subjects in clothes pockets. The seat belt adapts to each movement of a body.

The belt should adjoin to a body whenever possible densely; therefore before being fastened, take off clothes from especially thick and volume material, and also do not throw back back too far a seat back.

The belt should adjoin constantly to a body whenever possible densely (the inclination of a back of a seat should be small) for the following reasons. At face-to-face collisions the zone strap of a belt can slide off hips and wound the lower part live that. Holding action of belts because of increased люфта is late. Pregnant women also should be fastened always by a seat belt and thus watch that the zone strap adjoined below to hips, instead of was on the lower part of a stomach.

Individual adjustment of a seat belt is carried out by means of change of height of its top fastening.

One seat belt it is possible to fasten only one person.

The seat belt should not be imposed on a neck, be jammed or rub about sharp edges.

It is not allowed to put babies and juvenile children on knees during movement.

For children till 12 years use the relevant systems of safety.

Safety of babies about 9-months can be provided with use of the special children's cradles established against a course of the car on forward or back seats and fastened by regular seat belts.

For children at the age from nine months till three years and from three to six years you can use the BMW firm VARIO system, established in the direction of travel with use of a regular seat belt.

It is possible to use also sitting for children at the age from two till twelve years, consisting of three parts - baskets for a seat, a back and the catching device.

This seat fastens in the direction of travel with application of a regular seat belt.

Using children's systems of safety, surely observe instructions of manufacturers. Necessary points of fastening at serial execution are in a back part of salon behind forward seats.

It is forbidden to make any constructional changes to system of seat belts or children's systems of safety.

If system of seat belts, including an inertial natyazhitel (is in a development stage), and also children's system безопасности* were damaged or underwent critical loading owing to failure, it is necessary to replace them new, and also to check fastenings of belts. Repair and check charge to experts on the BMW service.

At the involved inertial natyazhitel of a belt between the lock and a casing there is a gap in 20 mm.

The seat belt is blocked at:

  • sharp pulling of a belt;
  • sharp braking or acceleration;
  • movement on a curve;
  • strong inclination of the car.

Safety cushion - buffer system Airbag*

The buffer system Airbag protects the driver at face-to-face collision.

At blow the safety cushion will amortize sharp moving of the case of the driver forward and protects the top part of a trunk.

The buffer system Airbag works, since precisely certain force of face-to-face collision.

On an illustration the zone of the direction of blow in which there is a system operation is represented.

At small failures in case the car turned over, lateral or back blows your safety is provided only by a seat belt.

Existence in the car of a safety cushion does not release from a duty to be fastened by belts.

Light indication of Airbag in a combination of devices

The indicator shows that the system can use, from the moment of ignition key turn in situation 1.

The system is ready to work:

  • the inscription of Airbag is shone during прибл. 6 seconds and then again die away.

The system is faulty:

  • the inscription does not light up;
  • the inscription is shone during прибл. 6 seconds, die away for short time and lights up again;
  • the inscription blinks during movement within 5 minutes and then is shone continuously.

In this case there is a danger that the system at failure will not work. At once address on the BMW service with a request for check.

System operation

The safety cushion being under a soft decorative overlay of a wheel, is filled with air, breaks off a place of the programmed destruction and is inflated over a steering wheel.

All process lasts only some fraction of a second.

At safety cushion operation the driver does not feel feeling of blow - on the contrary - cotton, fast filling and an air outlet, owing to short time of reaction, are lost in vanity of an emergency event.

The driver should take seat on a seat at the corresponding distance from a steering wheel since the pillow is filled with air with considerable speed and force. During movement the head and the top part of a trunk should be held whenever possible further from a steering wheel.

At operation of Airbag system working gas and a small amount of smoky gas is liberated. These gases are not unhealthy and are not a fire sign in the car.

Safety measures

It is forbidden to make any constructional changes to electroconducting and in separate components of the device.

It concerns as well a decorative overlay of a steering wheel, which should not be stuck, fitted anew, change or be processed in any way, and also the most steering wheel which dismantle is forbidden.

Works on repair of Airbag system can be made only on the BMW service.

The works which have been carried out not properly, can lead to refusal or casual operation of system and, as a result of they are to wounds.

At a vybrakovka of the generator of an inflatable safety cushion surely observe the safety rules made by BMW firm with which it is possible to familiarize on any BMW service.

For ensuring reliable functioning of system by all means observe terms verifying, the tests, specified on самоклеющейся to the plate in a ware box.

Rear-view mirrors

External rear-view mirrors with the electric drive

Change of situation by means of switching of the corresponding directing lever.

Electric обогрев*

Heating of both mirrors is carried out automatically at key turn in the ignition lock in situation 2.

Right external rear-view mirror

Regulation by means of the directing lever after switch pressing.

This mirror convex. Objects seen in a mirror are closer, than it seems in a mirror. Therefore definition approximately distances to moving behind a vehicle probably only is conditional. It concerns also a convex part of a spherical mirror of the increased visibility.

Spherical mirror raised обзорности*

The spherical convex external part of a mirror creates bigger, in comparison with an internal part of the mirror, slightly distorted field of the review.

As a result of it the back review extends and "the dead zone" is excluded so-called.

Change of provision of a mirror is manually carried out by pressing edges of mirror glass.

Internal rear-view mirror

For reduction of blinding action behind at night trips change a tilt angle a perekidny rychazhok.

Antisolar peaks

Can turn towards lateral glass. Cosmetic mirrors have mobile shtorka.

Illumination cosmetic зеркала*

Cast away down an antisolar peak and remove aside a shtorka.

Internal rear-view mirror with automatic change of a corner наклона*

The rotary button in situation 0 - the automatic mode is disconnected.

The rotary button in situation 1 - a mirror automatically changes a tilt angle, depending on force of light (the general illumination and blinding headlights).

At backing inclusion the mirror is automatically switched in a starting position.


For serviceable functioning of a mirror photo cells should be kept clean and not be blocked.

Internal rear-view mirror with mechanical change of a corner наклона*

The rotary button in situation 0 - an initial position.

The rotary button in situation 1 - the mirror is inclined.

Switch of ignition and starter/lock of a shaft of a steering wheel

0 — the Steering is blocked.

The key is inserted or taken out only in this situation. Consumers of a current are disconnected, however, the part from them can is included, for example, lay and marker lights, internal lighting, system of the alarm light system, the electric drive of change of provision of seats and the lighter.

Blocking

Extend a key and slightly turn a steering wheel before clamp operation.

Deblokirovka

Slightly rotating a steering wheel to the right-to the left, turn a key.

1 — the Steering is deblocked

  • In this situation an additional number of consumers, for example, a radio receiver and the board computer can work.

2 — Ignition is included by BMW 525tds - preheat;

  • All consumers of a current are connected.

Condition of ensuring comfort which gives you electric equipment, well charged storage battery is. Idling the storage battery is charged only slightly.

Therefore we recommend, if it is not absolutely necessary, at movement in the city, a column, etc. temporarily to disconnect the equipment with high consumption of a current (for example, heating of a seat, back glass).

For saving of information in memory of separate devices, in electric system the small current continuously arrives. This circumstance should be considered especially when the car is put on long parking more than four weeks. Previously, to avoid a discharge of the storage battery, disconnect it from an onboard network.

3 — starter Inclusion.

Accelerator pedal at start do not press.

On the cars equipped with an automatic transmission, start-up of the engine is possible only at establishment of the lever of switching in situation P or N.

Important information

We warn - never start the engine in the closed rooms. The fulfilled gases contain not having color and a smell, a poisonous oxide of carbon. Inhalation of the fulfilled gases is unhealthy, can cause an unconsciousness and lead to death.

Never take out a key during car movement as in this case can work the lock of a shaft of a steering wheel.

Leaving the car surely take out a key from the lock of ignition and block the lock of a shaft of a steering wheel.

Light switch

The 1st step — dimensional light
The 2nd step — a passing beam

If ignition is switched off at the included passing beam, only dimensional light continues to burn.

Cars without the control and alarm display - after ignition key turn in situation 0 within several seconds the buzzer for a reminder that light is not switched off is distributed.

The buzzer becomes silent if to press the button of zeroing of the daily counter of the passable way.

Cars with the control and alarm display - the reminder is made by indication on the control and alarm display.

Illumination of a guard of devices

Regulation of lighting is carried out by roller rotation.

Passing beam for movement during light time суток*

If it is required, it is possible to leave the switch of light at the second step; at ignition switching off the passing beam and dimensional light will automatically go out.

On some models, depending on execution option, the passing beam for movement joins automatically at key turn in the ignition lock in situation 2 even if the switch of light is in a position 0 in the afternoon.

The combined switch of indexes of turn/light of headlights

1 — the Driving beam (a dark blue control lamp)
2 — the Blinking a driving beam
3 — the turn Index (a green control lamp and a periodic sound signal of the relay of the breaker of indexes of turn)

The accelerated blinkings of a lamp and clicks of the breaker testifies that one of lamps of indexes of turn fused.

Unstable position of the lever of indexes of turn

The switch lever at the beginning of maneuver or change of a number of movement do not fix. The lever comes back to a starting position automatically.

Lay fires of the left and right board

The lever to squeeze out down for the provision of inclusion of the corresponding index of turn.

Lever of switching of screen wipers and stekloomyvatel

1 — the Interval operating mode of cleaners
2 — the First speed of work of cleaners
3 — the Second speed of work of cleaners
4 — Single inclusion of cleaners
5 — the Automatic operating mode of cleaners
6 — the Automatic mode of a hard work of cleaners and омывателей*

Purification of glasses фар* or fog lights

At every fifth course of a brush of a screen wiper at inclusion of an automatic mode or an automatic mode of a hard work of cleaners and омывателей* headlights if marker lights are thus included are at the same time cleared also.

1 — the Interval operating mode of cleaners

The time interval is regulated automatically, depending on speed of movement.

If there is a possibility of programming of an interval *, for time programming the lever switch shortly from situation 0 in situation 1.

Time before repeated switching (from situation 0 in situation 1) - also is the programmed time interval (Max. 20 seconds, at the stopped car increase twice).

To extinguish it, rearrange the lever in situation 2 or switch off the engine.

2 — the First speed of work of cleaners

On the motionless car switching on an interval operating mode occurs automatically.

5 — the Automatic operating mode of cleaners and washers

Detergent is sprayed on a windscreen and for a while the cleaner (if the lever to wring out in this situation only for an instant, will work only a washer) joins.

6 — the Automatic mode of a hard work of cleaners and washers

Similar to point 5, however, in addition before it on a windscreen especially strong detergent is sprayed.

Heating snuffled стеклоомывателей*

Joins automatically at key turn in the ignition lock in situation 2.

Use stekloomyvatel only if detergent freezing on a windscreen since otherwise visibility sharply decreases is excluded.

Do not use stekloomyvatel at an empty tank - it is possible to damage the pump. The frozen brushes of a screen wiper separate from glass at inclusion of a screen wiper not to damage system.

BMW Touring

1 — the Interval operating mode of a cleaner of back glass
2 — the Automatic operating mode of a cleaner and a washer of back glass (inclusion by a push)

Counter of the general run

Registers total of the passable kilometers.

Run measuring instrument from the moment of dumping

Registers run to 999.9 km.

Zeroing (from the moment of key turn in the ignition lock in situation 1). Press the button.

Reading of indications of the counter of the general run and measuring instrument probably at the taken-out key or its turn in the lock in situation 0.

For this purpose press the zeroing button, for some time there will be the corresponding indication.

Tachometer (The main scale)

Do not allow increase in frequency of rotation of a shaft of the engine to size at which the arrow comes into a red zone.

In this range, for the purpose of protection of the engine, supply of fuel that has an effect interruptions in its work interrupts.

Ekonometr (The bottom scale)

Points fuel consumption in liters to 100 km., since the speed прибл. 20 km/h.

This device allows to watch an economic mode of driving.

Index of level of fuel

The control lamp of a reserve lights up, when in a tank there are about 8 more liters of fuel.

For serviceability control the lamp at inclusion of ignition lights up for short time.

The index of temperature of cooling liquid

Arrow in a dark blue field - the engine cold. Movement with average frequency of rotation of a cranked shaft of the engine and moderate speed is recommended.

The arrow in a red field, lights up a control lamp, on control and alarm дисплее* there is "Kuhlwassertemp" inscription ("Temperature of cooling liquid") - an engine overheat. Immediately switch off and cool the engine. An arrow between color fields - normal working temperature. At high external temperature or strong load of the engine of the shooter can come nearer to a red field. Control of level of cooling liquid - see. Head Routine maintenance of the car.

Indication of intervals of maintenance

Green fields - the quantity of being shone fields less, the term of the next maintenance of your car is closer.

The yellow field together with OILSERVICE indication (OIL REPLACEMENT) or INSPECTION (MAINTENANCE) - lights up at approach of term of maintenance and is shone continuously.
Red field - the carrying out deadline expired THAT.

Emergence of a symbol of hours together with indication INSPECTION (MAINTENANCE) - indicates the next term of replacement of brake liquid.

Parking time during which the storage battery is disconnected, is not considered by indication of intervals of maintenance.

For the purpose of observance of a biennial interval of replacement of brake liquid, this period of time should be considered surely, i.e. replacement of brake liquid is necessary for carrying out respectively before emergence of a symbol of hours.

Indication dies away after engine start-up. After carrying out maintenance on the BMW service indication is established by experts in a starting position.

In this respect you will find more detailed information in the service book.

Control lamps

Indexes of the left/right turn

Light up periodically at inclusion of the index of turn.

Driving beam

Burns at the included driving beam or giving of a distant light signal.

Turn index прицепа*

Blinks at the same time with the turn index if the car is maintained with the trailer.

Wear of overlays of brake shoes

Lights up at inclusion of a starter and dies away after engine start-up.

Lights up during movement - replace brake shoes whenever possible quicker.


Use only firm brake slips allowed by BMW.

Parking brake

Dies away after engine start. Lights up at a tightening of the parking brake.

Hydraulic drive of brake system

Dies away after engine start.

Lights up during movement - low level of brake liquid.

Anti-blocking system of brakes (ABS) *

Dies away after engine start-up.

Lights up during movement - the ABS system is disconnected owing to malfunction. Normal braking is provided completely.

The request to fasten belts безопасности*

The combination with sound сигналом* or indication on control and alarm дисплее* is possible.

Lights up at inclusion of ignition and then dies away (sometimes dies away after a pristegivaniye of seat belts, depending on execution).

Pressure of oil in lubricant system of the engine

Dies away after engine start. The blinking is allowed idling at the warm engine, but should go out at increase in turns. Lights up during movement, on the control and alarm display there is "Oildruk Motor" indication - ("Pressure of oil in the engine").
  • immediately stop and switch off the engine. Check oil level, if necessary, add. If oil level as it should be, address for council on the BMW service.

ASC T = System of stabilization of stability and adjustment traction усилия*.

б) BMW 525iX: Anti-blocking system with electronic regulation.

The point and) - is more detailed - the item ASC T - System of stabilization of stability and adjustment traction усилия*.

The point) - a control lamp blinks - the anti-blocking system is adjusted according to loading and road conditions.

The control lamp is shone

The system is defective, but also without effect of anti-blocking the car can normally be maintained. For, carrying out repair address on the BMW service.

Insignificant, temporary malfunctions are eliminated with the monitoring system at repeated start-up of the engine.

Charge of the storage battery

Dies away after engine start-up. Lights up during movement - defective maple a belt of a drive of the generator or malfunction in a charge chain. The storage battery is not charged any more.

In case of a defective maple belt operation of the water pump therefore there is a danger of an overheat and engine damage stops.

Address on the BMW service.

Besides, at a defective maple belt it is necessary to make bigger effort at rotation of a steering wheel.

Antifog фары*

It is shone at the included fog lights.

Back foggy fires

It is shone at included foggy fires.

BMW 525tds

Control lamp of the button of cold start

 

Preheat

For start of the engine address to the item BMW 525tds.

Regulation of electronic system of injection

Lights up for some seconds at key turn in the ignition lock in situation 2 (warming up).

If lights up during movement - in system of injection malfunction is found. Continue movement to the next HUNDRED in a mode of limited capacity.

Antifog фары*

At the switched-off fog lights the green control lamp in a combination of devices is shone.

Back foggy fires

At the included back foggy lamps the yellow control lamp on a control panel is shone.

Heating of back glass

Press the button - work of a control lamp testifies that there is an intensive heating of back glass (fast thawing).

The cars equipped with the conditioner or automatic central air of air:

  • if the control lamp dies away, the system is switched automatically to an economic operating mode and after прибл. 20 minutes are switched off.

By repeated pressing of the button - the cycle (including fast thawing) repeats.

Switching off of o press the button at a being shone control lamp.

After each start-up of the engine heating of back glass is necessary for including again.

Alarm light system

The button at the switched-on alarm system lights up red blinking light.

At the included dimensions the press button is highlighted.

Display самодиагностики*

Messages on malfunctions appear in the form of the text - instructions and preventions, the buzzer sound is at the same time distributed. Messages on malfunctions have three degrees of importance

Degree of importance 1
Text

Value/the Help

Bremsflussigkeit

Brake liquid

Level of liquid fell to a minimum. Add at the first opportunity - see. Head Routine maintenance of the car.

Oildruck Motor

Pressure of oil in the engine

Establishment of the reason of loss of brake liquid and its elimination charge to experts of the BMW service. Too low. Immediately stop and switch off the engine. Address to diagnostics of malfunctions of Head Brake system.

Handbremse losen

To release the hand brake

Appears after a start of motion.

Kein Bremslicht

Stop - signals do not function

Fused lamps or safety locks, replace lamps or safety locks (Head System of onboard electric equipment).

Bremsli Elektrik

The electrician of feet - signals

Stop - signals do not burn - safety locks or an electric chain are faulty; replace safety locks (Head System of onboard electric equipment) or address on the BMW service.

Niveauregelung*

Regulation of a road gleam *

The car is overloaded or the system of regulation of a road gleam is defective; reduce loading or address on the BMW service (Max. speed: 170 km/h).


*poperemenno with "Niveauregelung" indication ("Regulation of a road gleam") appears the prevention "max. 170 km/h" ("Max. 170 km/h") in case it is speed it is exceeded. The prevention will go out at decrease in speed.


SPEED LIMIT*

SPEED LIMIT.

Indication appears at excess ordered пре efficient speed. Observe traffic regulations.

These malfunctions are immediately signaled by a buzzer and a blinking index sign (1).

At simultaneous emergence of several malfunctions they are displayed consistently.

Messages remain until malfunctions will be eliminated and cannot be dumped by a key of the display of self-diagnostics (2).

Degree of importance 2
Text

Value/the Help

Getriebeprogramm*

Box program передач*

Automatic transmission - malfunction of electronic system - see below, the item. Control lamp electronic, systems of automatic transmission (3).

Bremsbelage

Overlays of brake shoes

Are worn-out (address to Head Brake system).

Waschwasserstand

Liquid level in a washer tank

Fell below norm, add at the first opportunity (address to Head Routine maintenance of the car).

1 Bremslicht

1 feet - a signal

 

One lamp fused (address to Head System of onboard electric equipment).

 

Abblendlicht

Passing beam

The lamp or safety lock or electric chain fused is faulty (address to Head System of onboard electric equipment).

Kennzeichlicht

Lamp of illumination of registration plate

Anhangerkicht*

Lamps прицепа*

The safety lock of illumination of the trailer or electric chain are faulty; replace a safety lock (Head System of onboard electric equipment).

The message appears at key turn in the ignition lock in situation 2 (if there are malfunctions of degree of importance 1, they appear automatically). After messages on the display die away, there are signs of existence of information. If there is a plus (3) - cause them in pressing a key 2.

By means of a key of the display of self-diagnostics the messages entered into memory can be extinguished till their automatic deleting or, on the contrary, specified by a sign of existence of information of the message can be caused respectively from memory.


Degree of importance 3
Text

Value/the Help

Oelstand Motor*

Oil level

Oil level in the engine went down to a minimum. Check oil level, add as soon as possible (for example, when filling) - see Glavutekushchey car service.

Kuhlwasserstand

Level of cooling liquid

Level of cooling liquid is lower than norm. Add at the first opportunity - see. Head Routine maintenance of the car.

Sensor Oelstand*

Level sensor масла*

The sensor of level of oil is faulty. Address to materials of Head Routine maintenance of the car.

At the faulty sensor low level of oil is not displayed before carrying out repair!

Check-Control

Self-diagnostics display

Malfunction of electronics, various messages thereof are not displayed. Address for the help on the BMW service as soon as possible.

Licht an? *

Light is included? *

The message upon termination of movement (after opening of a door of the driver).

Bitte angurten*

Fasten ремни*

This message can appear along with a signal control лампы* or sound сигналом*.

The message appears for the first time only upon termination of a trip at key turn in the ignition lock in situation 0 (at several messages there is a consecutive indication - messages of degree of importance 3 follow messages of degree of importance 2 and 1). Thus, by means of a display key, the message still can be caused approximately within three minutes after the completion of movement, even at taken out of the ignition lock a key and the gone-out indication. The message appears also before the trip beginning at key turn in the ignition lock in situation 2. The text dies away through short time (with a start of motion) and the sign of existence of information is not displayed. New messages appear after key turn in situation 0. At emergence of a plus - cause available messages, having pressed a key of the display of self-diagnostics.

General information: If there is an inscription "Betriebsanleitung" ("Operation manual"), it is necessary to follow the instructions provided above.

The inscription of "Betriebsanleitung" can be extinguished, having pressed a key of the display of self-diagnostics.

Check of serviceability of the display (in the absence of messages) - having turned a key in the ignition lock in situation 2, press a key 2 - there should be CHECK CONTROL OK message (the DISPLAY of SELF-DIAGNOSTICS is SERVICEABLE).

EDC - electronic adjustment of rigidity амортизаторов*

To — the Comfortable mode of movement
S — the Sports mode of movement

Switching from one mode on another probably at any time at movement if the key is in the ignition lock in situation 2.

The chosen mode (comfortable or sports) remains at any speed and loading.

Shoulders of the switch are highlighted. At malfunction the control lamp dies away. For repair address on the BMW service as soon as possible.

ASC T - System of stabilization of stability and adjustment traction усилия*

The system prevents pro-slipping of driving wheels under adverse conditions (ice) and provides, thanks to it, their optimum from the point of view of physics laws coupling with a road cloth.

The system joins with engine start-up

The control lamp in a combination of devices on a guard dies away right after ignition inclusion.

System shutdown - press the button, the control lamp lights up.

Repeated inclusion of system - again press the button, the control lamp dies away.

The control lamp blinks - system in a control mode under traffic conditions.

The control lamp does not die away after start-up of the engine or flashes during movement - the system is faulty; however, the car can be maintained and without ASC T system in a usual mode. For repair of ASC T system address on the BMW service.

Parking brake

The lever of the parking brake is independently fixed at a tightening. The control lamp of "R" in a combination of devices thus lights up.

Release of the parking brake - slightly pull the lever upward, press the button and release the lever.

The parking brake influences back wheels. If during movement in it there is a need, do not tighten the lever too strongly, in order to avoid excessively strong braking which can cause blocking of a back axis and the vylamyvaniye of a back of a body connected with it.

If the lever of the parking brake will tighten, lamps of stoplights do not burn.

Transmission

Neutral position of the lever gear shiftings (point) is in the plane of switching of the third/fourth transfer. When switching from any transfer to neutral situation the lever automatically comes back to a starting position. All transfers are synchronized.

If on the fifth transfer frequency of turns of the engine - 5000 rpm - on cars with an internal combustion engine with compulsory ignition of a working mix is exceeded and 3800 rpm - on cars with the diesel engine - that switching on the fourth step of a transmission is not admissible - there is a danger of damage of the engine.

Reverse gear

At the stopped car and moving of the lever of gear shifting to the left it is necessary to overcome small resistance.

Backing headlight

Lights up at the included ignition and the included reverse gear.

On liftings do not practise a car pritormazhivaniye at the expense of incomplete inclusion of coupling; use the parking brake. Incomplete inclusion of coupling causes its increased wear.

Automatic трансмиссия*

Control lever positions automatic transmission (1): R of R N D 4 3 2.

Besides, by means of the toggle-switch it is possible to choose between three various modes of driving (2):
Е (Economy) - economic driving. To drown the toggle-switch.
S (Sport) - Sports driving.
*Winter) - Winter driving. The toggle-switch to move in demanded situation.

Keep in mind:

Start-up of the engine is possible only in position of the lever P or N.

From below on the control lever handle the blocking button which prevents erroneous switching of a control lever is an automatic transmission. For a deblokirovka of the lever press the button.

After control lever establishment in a movement position before pressing an accelerator pedal, at first wait the moment of inclusion of an automatic box!

On the minimum turns (idling turns) the car at the included position of movement moves also in case you do not touch an accelerator pedal.

In case of erroneous switching on high turns in a position N, immediately release an accelerator pedal. After zty establish a control lever in a necessary position.

Before leaving the car at, the working engine, establish a control lever an automatic transmission in a position P or N and cock the lever of the parking brake!

R — the Parking

To include only at the motionless car. Driving wheels are blocked.

R — the Backing

To include only at the motionless car and idling turns.

N — the Neutral position (Idling)

To include only at long pauses in movement, and also at danger of drift of the car.

D — Drive — Movement (A position of automatic gear shifting)

Joins in a usual mode for movement on all transfers.

4 — Direct transfer

You put the lever in this position if in a position B need of frequent transition with the 5th on the 4th transfer is obvious. In this case the 5th transfer does not join.

3 and 2* — the Lowering step with the increased transfer number, a pritormazhivaniye step.

These positions should be included in mountains, and also on long liftings and descents. Such mode gives the chance to use engine capacity optimum.

Thus the effect of braking by the engine amplifies and undesirable switching on higher transfer is avoided.

These positions can be involved on any speed. The transmission is switched to the lowest transfer only when the corresponding low speed is reached.

*pervy transfer joins automatically. This position, thanks to coordination system, is especially good for car operation with the trailer.

Other-wordly pressing a pedal of an accelerator ("Kick-Down")

The pedal of an accelerator can be squeezed out for a point of maximum "gas". Thus it is necessary to overcome the increased resistance on a pedal course.

The transmission is switched in this case to a low gear for the accelerated dispersal. The subsequent switching on an overgear occurs at higher turns.

Movement modes

Е (Economy) — an economic mode

For movement with the smallest fuel consumption; is a starting position after each start.

S (Sport) — a sports mode

For sports movement. The transmission is switched to an overgear later that gives the chance to use a reserve of capacity of the car completely.

* (Winter) — a winter mode

For winter traffic conditions. In positions In transfers from the 2nd to the 5th join in the most optimum way for movement in winter conditions.

In positions 4 3 and 2 chosen transfer does not change. It means that the car gets under way from a place on this speed and at dispersal switching on a low gear does not occur.

On liftings or at movement with the trailer it appears, for example, favorable movement with installation of the lever of an automatic transmission in a position 2 or on the slippery road - in a position 4 that gives the chance smooth dispersal and prevents in the winter undesirable switching of speeds.

Control lamp electronic, systems of automatic transmission (3)

  • if the lamp lights up during movement or
  • on the control and alarm display there is a message "Getriebeprogrfmm" ("Program schedule"), it testifies to malfunction of electronic system or a transmission.

In this case the lever of an automatic transmission still can be established in all positions, however, the car can move to advance positions only on the 4th or 5th transfer.

In this case avoid high loadings and address on the next BMW service.

If the control lamp lights up or there is a message on refusal of electronic system, further movement on the car is forbidden and it is necessary for repairing on the BMW service.


Never make any works in podkapotny space at the included position of movement. Do not leave children in the car without supervision.

Operations procedure at towage for the purpose of start-up of the engine, an otbuksirovaniye and engine start-up by means of the auxiliary accumulator - address to Head Cars of the BMW brand of 5-series and to the Section engine Start from an auxiliary source.

Heating and ventilation

1-3 — Levers of distribution of submitted air

Smooth regulation of distribution of warm air.

  • The lever on the left - it is closed;
  • The lever to the right - it is opened completely.

1 — the Lever of distribution of the air submitted on glasses

Air arriving through deflectors goes on a windscreen and forward lateral glasses.

2 — the Lever of distribution of the air submitted in the middle

Supply of air is regulated by turn of deflectors in the middle of the dashboard, in forward doors, and also on the top party of the dashboard.

3 — the Lever of distribution of the air submitted to feet

Air arrives via the deflectors located in a lobby and a back part of space for feet. On cars without the microfilter - these nozzles should be always open for the correct functioning of the temperature sensor approximately half (except for a mode of a defrosting of glasses) that corresponds to average position of the lever.

Ventilation of a back part салона*

Ventilation of a back part of salon can be carried out by means of directing deflectors in the average console irrespective of position of the lever on the dashboard. Through them exclusively fresh air arrives.

4, 6 — Rotary switches of temperature for the left and right parties of salon

On scales rough values of temperature established in salon are specified. The chosen temperature is reached extremely quickly and, as a rule, further should not change (automatic control of temperature).

In order to avoid undesirable jumps of temperature switches turn gradually.

If the rotary switch of temperature on the party of the driver will turn in one of final provisions, automatic control of temperature both on the party of the driver, and on the right side it is switched off. (These provisions can be used as emergency inclusion of heating or cooling in случав not serviceability of electronic system of regulation of temperature).

5-The switch and the rotary switch of amount of submitted air

Situation 0 - the system is switched off, supply of air is blocked.

Turn clockwise from the fixed situation - the system is included, the minimum quantity of air arrives, the fan works with the minimum productivity.

Further rotation to the right - amount of submitted air increases, the minimum productivity of the fan.

The increased productivity of the fan - steps 2-4.

For the correct functioning of electronic system of regulation of temperature the rotary switch should be established a minimum in a position "12 hours".

For the most intensive heating wind and lateral glasses it is used:

7 — the Scheme of regulation of the maximum heating of glasses

The maximum effect is reached if the engine is heated-up.

Zapotevaniye of glasses occurs owing to formation of condensate because of a difference of temperatures or at too high humidity of air Elimination of condensate is eliminated only obduvy glasses with a large amount of warm air.

Comfortable traffic conditions - thanks to level-by-level distribution of the conditioned air: warm feet - the cold head
The air temperature, submitted through nozzles on the dashboard and forward doors can change by means of rotation of a roller 1:
rotation to the right - is warmer;
rotation to the left - is colder;
The direction of a stream of air can individually be regulated by deflectors, and its quantity - a roller. Shovels of the deflector located from above on the dashboard are motionless and ventilation of an average part of salon through it occurs is mediated.

Heating, ventilation and conditioner **

1-3 — Levers of distribution of submitted air

Smooth regulation of distribution of heated-up air.

  • The lever on the left - it is closed;
  • The lever to the right - it is opened completely.

1 — the Lever of distribution of the air submitted on glasses

Air arriving through deflectors goes on a windscreen and forward lateral glasses.

2 — the Lever of distribution of the air submitted in the middle

Supply of air is regulated by turn of shovels in the middle of the dashboard in forward doors, and also on the top party of the dashboard.

3 — the Lever of distribution of the air submitted to feet

Air arrives via the deflectors located in a lobby and a back part of space for feet.

Ventilation of a back part салона*

Ventilation of a back part of salon can be carried out by means of deflectors of the average console irrespective of position of the lever on the dashboard. Through them exclusively fresh air arrives, and at the switched-on conditioner - cooled.

4, 6 — Rotary switches of temperature for the left and right parties of salon

The mode of regulation of temperature joins and switched off by the rotary switch on the party of the driver. The left final situation - regulation of temperature and heating does not occur.

Turn from the fixed situation to the right - joins a mode of regulation of temperature.

The right final situation (fixed] - the maximum heating of salon, regulation of temperature does not occur (this situation it is possible to use as emergency inclusion in case of malfunction of electronic system of regulation of temperature).

On scales rough values of the established temperature in salon are specified. The chosen temperature is reached extremely quickly and, as a rule, should not change (automatic control of temperature). In order to avoid undesirable jumps of temperature the switch turn gradually.

5 — the Switch and the rotary switch of amount of submitted air

Situation 0 - the system is switched off, supply of air is blocked.

Turn clockwise from the fixed situation - the system is included, the minimum quantity of air arrives, the fan works with the minimum productivity.

Further rotation to the right - amount of submitted air increases, the minimum productivity of the fan.

The increased productivity of the fan - steps 2-4.

For the correct functioning of electronic system of regulation of temperature the rotary switch should be established a minimum in a position "12 hours".

For the most intensive heating wind and lateral glasses it is used:

7 — the Scheme of regulation maximum обдува glasses

The maximum effect is reached, if the engine is heated-up.

Zapotevaniye of glasses occurs owing to formation of condensate because of a difference of temperatures or at too high humidity of air. Condensate elimination

it is made only obduvy glasses by a large amount of warm air.

8 — the AUC Switch - Systems of an automatic retsirkulyatsiya воздуха*

This system distinguishes the most admissible pollution of external air by harmful substances and interferes with their receipt in salon.

By repeated pressing of the switch three functions are activated:

  • light-emitting diodes are switched off - a normal mode of intake of fresh air;
  • the light-emitting diode at the left lights up - the sensor measures a share of harmful substances in external air; at the increased values of the content of harmful substances in external air of a zaslonka of intake of fresh air automatically are closed and the system works in a retsirkulyatsiya mode;
  • the right light-emitting diode lights up - the retsirkulyatsiya mode is included.

Systems of a retsirkulyatsiya of air

The mode of a retsirkulyatsiya of air is recommended at strongly polluted external air - in salon рециркулирует internal air that interferes with penetration polluted outside. The burning control lamp signals a serviceable mode of a retsirkulyatsiya of air.

In spite of the fact that for improvement of quality of air (for example, drying) the conditioner is connected automatically, the mode of a retsirkulyatsiya of air should not be included for a long time.

If glasses in a mode of a retsirkulyatsiya or in the AUC mode mist over from within, be switched to a normal operating mode and press the conditioner switch 9.

9 — the conditioner Switch

At the pressed button the conditioner turns on, since прибл. 1 ° From external temperature. The control lamp signals operation of the conditioner. Air is cooled and becomes drier.

At very high humidity of air it is recommended to dry air by preliminary turning on of the conditioner (while the evaporator yet did not become covered by condensate). Glasses in this case do not mist over. Thus cooled air should not be brought to a windscreen since it can mist over outside. At the maximum holodoproizvoditelnost the system is switched automatically to a mode of a retsirkulyatsiya of air (with an insignificant share of fresh air).

10 — the Switch of heating of back glass

Functioning similarly described on point Heating of back glass.

Comfortable conditions of movement - thanks to level-by-level distribution of the conditioned air: warm feet - the cold head.

The air temperature, submitted via deflectors on the dashboard and forward doors can change by means of rotation of a roller 1:

  • rotation to the right — is warmer
    rotation to the left — is colder

Automatic central air

1, 3 — Rollers of regulation of temperature for the left and right side of salon

The mode of regulation of temperature joins and switched off by a roller on the party of the driver.

The left final situation - temperature is not regulated, submitted air as much as possible is cooled.

Rotation from the fixed situation to the right - joins temperature regulation.

The right final situation (fixed) - the maximum heating of salon, regulation of temperature does not occur (this situation it is possible to use for emergency inclusion in case of malfunction of electronic system of regulation of temperature).

On scales rough values of established temperatures are specified. The chosen temperature is reached extremely quickly and, as a rule, should not change. The switch turn gradually, in order to avoid undesirable jumps of temperature.

2 — the Switch and a roller of regulation of amount of submitted air

Situation 0 - the system is switched off, supply of air is blocked.

Turn to the right before fixing - the system is included, ventilation works with the minimum productivity. Further rotation to the right - amount of submitted air increases.

The right final situation (fixed) - the maximum supply of air (this situation can be used for emergency inclusion in case of malfunction of electronic system of regulation of temperature).

4, 8 — Keys of inclusion of an automatic mode of distribution of submitted air for the right and left parties of salon

Distribution of air occurs automatically depending on temperature conditions.

Air arrives via deflectors of intensive heating wind and forward lateral glasses via deflectors on the dashboard and in forward doors, and also on the top party of the dashboard, through forward nozzles in space for feet in a lobby and a back part of salon, and also via deflectors in an end face of the average console for ventilation of a back part of salon.

After cold start-up during bad weather and temperature of a heating element is lower 30 ° About air arrives only via deflectors of intensive heating of glasses.

This program meets almost all requirements shown to comfortable air conditioning in salon.

For optimum work of system of automatic distribution of air it is not necessary to close all deflectors located on the dashboard.

Intake of air via all deflectors with shutdown of a mode of automatic distribution of submitted air.

It is recommended to use in hot weather for ventilation and air cooling in the lower part of salon.

Press this key, having at the same time increased intensity of operation of the fan and having closed ventilating nozzles for elimination of a zapotevaniye front and lateral glasses in case you do not want to press a key.


Distribution of the air submitted to feet in a lobby and a back part of salon

Deflectors of heating of glasses are only slightly opened and air to zaslonka at the end of the average console does not arrive.
It is recommended to use in cold weather when ventilation is undesirable, and intensive supply of hot air in feet is necessary.

5 — the AUC Switch - systems of an automatic retsirkulyatsiya воздуха*

This system distinguishes the most admissible pollution of external air by harmful substances and interferes with their receipt in salon.

By repeated pressing of the switch three functions are activated:

  • light-emitting diodes are switched off - a normal mode of intake of fresh air;
  • the light-emitting diode at the left lights up - the sensor measures a share of harmful substances in external air; at the increased values of the content of harmful substances in external air of a zaslonka snuffled intake of fresh air automatically are closed and the system works in a retsirkulyatsiya mode;
  • the right light-emitting diode lights up - the retsirkulyatsiya mode is included.

Systems of a retsirkulyatsiya of air

The mode of a retsirkulyatsiya of air is recommended at strongly polluted external air - in salon рециркулирует internal air that interferes with penetration polluted outside.

In spite of the fact that for improvement of quality of air (for example, drying) the conditioner is connected automatically, the mode of a retsirkulyatsiya of air should not be included for a long time.

If glasses in a mode of a retsirkulyatsiya or in the AUC mode mist over from within, be switched to a normal operating mode and press the conditioner switch 9.

6 — the conditioner Switch

At the pressed button the conditioner turns on at all operating modes, since прибл. 1 ° From external temperature. Air is cooled and becomes drier.

At very high humidity of air it is recommended to dry air by preliminary turning on of the conditioner (while the evaporator yet did not become covered by condensate), glasses in this case do not mist over. Thus cooled air should not be brought to a windscreen since it can mist over outside.

At the maximum hladoproizvoditelnost the system is switched automatically to a mode of a retsirkulyatsiya of air (with an insignificant share of fresh air), nozzles of heating of glasses are closed.

7 — the Switch of the maximum heating front and lateral glasses

Zapotevaniye of glasses occurs owing to formation of condensate because of a difference of temperatures or too high humidity of air. Elimination of condensate is reached only by heating of glasses by a large amount of warm air.

By pressing of this switch the maximum heating front and lateral glasses is carried out automatically, i.e. in any additional actions of need is not present.

The maximum effect is reached only at the heated-up engine.

After a deblokirovka of this switch the former operating mode is automatically restored.

Keep in mind: by the first pressing of the switch of a key after start-up of the engine heating of back glass joins.

Noise after switching off of the engine are caused by working air zaslonka - they are established in a starting position.

Comfortable traffic conditions - thanks to level-by-level distribution of the conditioned air: warm feet - the cold head.

Driver and passenger of a spravayepelniyets

The air temperature, submitted via deflectors on the dashboard and forward doors can, change by means of rotation of a roller 1:

  • rotation to the right - is warmer
  • rotation to the left - is colder

Passengers on back seats

Ventilating deflectors at the end of the average console open and regulated as required. Via these deflectors exclusively fresh air or - arrives at the switched-on conditioner - the cooled air.

Ventilation of a back part of salon is blocked automatically in case of ventilation inclusion on the party of the driver

  • AUTO - (only at cold weather);
  • air distribution only through nozzles in space for feet.

Important recommendations about operation of the conditioner:

  1. The condensate which was formed on the evaporator is taken away under the car; its quantity can make to 2 liters at an o'clock, depending on humidity of air.
  2. Preventively the conditioner it is necessary to include for a while a minimum of times a month (in particular in a cold season). Otherwise there is a danger of loss of elasticity of hermetic of a kompressionny shaft therefore there can be a leakage of cooling substance.
  3. At all malfunctions of the conditioner - for example, lack of cold air at the included system (an adjusting roller or the rotary switch of temperature on the party of the driver in the left final situation) - switch off it and address on the BMW service.

Микрофильтр*

Fresh air is sucked in via the microfilter. Thus flower pollen is filtered for 100 %, a dust for 60 %.

Replacement of the filter is included into volume procedural the robot on maintenance. The lowered air exchange indicates need of early replacement of the filter.

Internal lighting

1 — Lamps burn at an open door (inclusion through door contacts), at the switched-off ignition within several seconds after closing of doors or till ignition inclusion, and also - depending on execution option - after failure
2 — It is disconnected constantly
3 — It is included constantly

Lamps for чтения* near internal lighting turn on also.

Automatic system internal освещения* (in a combination to heating of the lock of a door of the driver)

In addition to aforementioned functions at the locked car internal lighting lights up for some seconds at a pripodnimaniye of the handle of a door of the driver (probably at most three times).

If it was turned on the light, internal lighting at ignition switching off also joins for some seconds.
Lamps for reading in a back part салона* can turn on, since the moment of turn of a key in the ignition lock in situation 1 by means of the nearby switch.

Tsiferblatnye hours

The button "" — time shift clockwise
The button "-" — time shift counter-clockwise

Press the button - the minute hand will move for one minute forward.

Hold the button of the pressed - the button is more long pressed, the there is time shift in the direction clockwise quicker.

Lighter

Press. After the spiral will be heated, the lighter will come back automatically to a starting position, it can be taken out.

Never touch a heating element of the lighter or to its edges; undertake only for the holder.

Lighter socket

It can be used as a plug nest for a portable lamp, the automobile vacuum cleaner or etc. to прибл. 200 W at 12 Century.

Watch to damaging the socket the improper tip.

Ashtray

 

Ashtray in a forward part of salon

Cigaret stick in a funnel without pressing, without pressing with force; before it shake ashes.

Ashtray cleaning in a forward part of salon

Extend an ashtray completely, having pressed the spring located under it.

Press ashtray in a back part of salon

Press from above an ashtray, she will be nominated automatically.

For cleaning press a spring at an open ashtray and take out it.

The lighter for passengers on back сиденьях* is on the end of the average console.

The lighter can use at the taken-out ignition key. Therefore do not leave children in the car without supervision.

Ware box

Opening — pull for the handle.
Illumination of a ware box joins from the moment of key turn in the ignition lock in situation 1.
Closing — slam a cover.

In order to avoid danger of a bruise and wounds at sharp braking the ware box during movement should be closed.

Blocking - is possible only the main key.

Lamp replacement - wring out a screw-driver the lamp, replace a lamp (5 Watt).

Charged figurative лампа*

The plug nest for a charged portable lamp is in a ware box at the left. The portable lamp, thanks to available protection against a recharge can be inserted into a nest constantly.

Lamp insert into a plug nest only the switched off.

Additional ware compartments

Are available on the dashboard, in forward doors, on the average console, it is possible on backs of forward seats *, and also in ящике* with a cover near a steering column at the left.

Automatic window regulators with электроприводом*

Join at key turn in the ignition lock in situation 2.

In a back part of salon under windows separate switches are located.

Tolchkovoye управление* - by means of a push of the corresponding switch can open and be closed a window of the driver, other windows - only to open.

Blocking switch (shooter)

With its help the manipulation (for example, by children) automatic sliding glasses of back windows is blocked.

Comfortable management of window regulators also is shifted - the lifted hatch with the electric drive

After ignition switching off it is possible:

  • at key turn in the ignition lock in situation 0 or
  • at the taken-out key, and also
  • at the first opening of doors

To close windows or it is shifted - the lifted hatch after closing of doors, hold a key in the door lock in one of two positions of closing until they will not be closed (comfortable closing).

Uncontrolled and inattentive closing of windows can lead to injuries. Therefore do not allow that children played with switches.

If in the car there are children, watch that the blocking switch (shooter), for manipulation prevention by back windows via the corresponding switches located in a back part of salon was pressed.

Leaving the car, surely take out a key from the ignition lock.

The automatic it is shifted - the lifted hatch with электроприводом*

Joins at key turn in the ignition lock in situation 2.

  • To raise - press the switch.
  • To open - the switch move back.
  • To close - the switch move forward.

Management толчком* - opening and closing of the slightly opened hatch is made by means of a switch push in the corresponding direction. At a repeated push of the switch movement stops.

In order to avoid an excessive razryazheniye of air or a draft in salon at opened and especially at the raised hatch during movement, air nozzles should be held opened and, if necessary, to increase supply of air.

At malfunction of the electric drive the hatch can be served manually.

The system is protected from overloads and mechanical hindrances by an automatic safety lock.

The double it is shifted - lifted люк*

For ventilation it is possible to raise the forward hatch, and also to move both hatches together or separately.
Inclusion at key turn in the ignition lock in situation 2.

After ignition switching off management is possible:

  • at key turn in the ignition lock in situation 0 or
  • at the taken-out key, and also
  • at the first opening of doors.

Comfortable закрывание*

To close windows or it is shifted - the lifted hatch after closing of doors, hold a key in the door lock in one of two positions of closing until they will not be closed.

If the key in the lock of ignition is in situation 0, system after прибл. 15 minutes are disconnected automatically.

Cursor управления*

Automatic movement of hatches occurs by means of a nazhimaniye on a switch cursor in the corresponding direction. At a repeated nazhimaniye of the switch, movement stops.

The switch move back or shortly press and release - the forward hatch will rise. At completely open hatch again shortly press and release or move the switch - the forward hatch will move back.

The switch press or shortly press and release - double it is shifted - the lifted hatch will be closed from any situation.

The switch move forward or shortly press and release - the forward hatch will rise. At completely open forward hatch again shortly press and release or move the switch - the back hatch will move forward.

Completely open back hatch incorporates to the forward. By the following pressing of the switch you can shift both hatches in any direction.

When moving in both directions both of the hatch stop in a certain, optimum position for ventilation.

Protective functions

In case of danger emergence each movement of the hatch can be interrupted with short pressing the switch.

If when closing one of hatches via the tolchkovy switch or the door lock they encounter an obstacle, closing will interrupt and the hatch slightly will move in the opposite direction.

In case the switch is pressed more than 10 seconds and the hatch does not move or giving of a current interrupted (for example, the storage battery) was disconnected, management of the hatch should be again activated. For this purpose press the switch until the hatch will not be closed completely or if it was already closed, press shortly the switch.

In order to avoid an excessive razryazheniye of air or a draft in salon at the open and especially raised hatch
during movement air nozzles should be held opened and, if necessary, to increase supply of air.

At malfunction of the electric drive the hatch can be served manually.

The system is protected from overloads and mechanical hindrances by an automatic safety lock.

When fastening on a luggage carrier roof for skis, for the purpose of providing sufficient a place for a podnimaniye of the forward hatch, watch that ski fastenings were fixed in front.

The mechanical it is shifted - lifted люк*

To open — cast away the handle, rotate it counter-clockwise.
To raise — at the closed hatch the handle rotate clockwise.
To lower — the handle rotate counter-clockwise, when closing it is necessary to overcome a resistance point.

In order to avoid an excessive razryazheniye of air or a draft at the open and especially raised hatch during movement air nozzles should be kept in salon opened and, if necessary, to increase supply of air.

Electric heating сидений*

Surface and backs of seats can be warmed at key turn in the ignition lock in situation 2.

Press the switch with a heating symbol:

  • The intensive heating, until then while is shone the switch. Switching on heating occurs automatically.
  • Heating. As soon as the switch will go out, heating is switched off automatically.
    Switching in a heating mode - press the gone-out switch.

Premature shutdown - press the being shone switch.

Average armrest of back seats

If necessary extend for a loop.

Opening ware отсека* on the average an armrest - extend upward the button in front under a cover.

Armrests of lobbies сидений*

Deblokirovk - press the button on the face party.

Correction of a tilt angle of light фар*

The passing beam can be regulated depending on car loading. A sedan and Touring which have not been equipped with system of regulation of a road gleam.
  • 0= 1-2 persons without luggage;
  • 1= 5 people, with luggage or without;
  • 2= 1 person, full luggage carrier.

The sedan equipped with system of regulation of a road gleam:

  • 0= 1-2 persons, without luggage;
  • 0= 5 people, with luggage or without;
  • 2= 1 person, full luggage carrier.

Touring equipped with system of regulation of a road gleam, and also BMW 525iX Touring: 0= 1-2 persons, without luggage:

  • 0= 5 people, with luggage or without;
  • 1= 1 person, full luggage carrier.

BMW 52SiX, 530i Touring:

  • 0= 1-2 persons, without luggage;
  • 1= 5 people, with luggage or without;
  • 1= 1 person, full luggage carrier.

Do not exceed the most permissible load on a back axis!

Very low provision of a passing beam testifies to malfunction in system of correction of a tilt angle of a beam of light of headlights.

Automatic antisolar shtorka back стекла* with the electric drive

For actuating shortly press the ravnoplechy lever of the switch.

Mechanical antisolar shtorka back стекла*

Antisolar shtorka of lateral glasses

Shtorka extend for a loop and veil in the holder.

Indication of external temperature and времени*

Along with time, you can cause date and external temperature on the display, and by means of a key of a reminder (Memo) - to include an hourly signal of a sound reminder.

At key turn in the ignition lock in situation 0 and pressing of the corresponding button it is possible to read out time and date. From the moment of key turn in the ignition lock in situation 1 there is time indication. Numerical data can change or be entered anew.

Time and date input

After a break in current giving (the first input, on the display a blinking point) it is possible to enter time, without pressing the UHR key by means of two keys of input of h/DAT and min/DAT. For date input previously press the DATUM key. By pressing of keys of input of information or every other half-seconds their deduction in such situation, the corresponding numerical value increases on one unit.

Function of time is displayed by a symbol of hours, and date - the letters DAT.

For start of hours to within a second press the UHR button, and for start of the program of a calendar - the DATUM key.

After that the point ceases to blink.

Before entering any changed numerical data, press the corresponding key (UHR or DATUM) and hold her in such situation until on indication between hours and minutes or in the afternoon and there will be no blinking point month.

If after input of new numerical data you did not start the program, and pressed other key, old numerical data remain.

Unreal figures are not accepted by the program. At date indication leap years are not considered and should be entered manually.

Recommendations about time indication in a 12-hour mode

Time symbol in the forenoon (AM) changes on time symbol on midday (RM) after each 12 hours and it is specified before its numerical value. As time it is possible to make the following changes for various options of executions:

  • 24 h or With
  • 12 h or F
  • 12 h or S-indication (see buttons on a case cover behind).

After switching with 24 sentry on 12 hour system there is an automatic change of function of keys of input from the date of both month for month and day.

Function of a sound reminder (Memo)

By means of a key of a reminder of MEMO it is possible to switch on and off an hourly signal of a reminder. Sound sig-. the cash is distributed in 15 seconds prior to the expiration of each full hour, and reminds, for example, if the tape recorder that it is necessary to turn on the receiver for listening of the latest news works. ME combination on the display indicates the activated function of a reminder.

External temperature

By pressing of key A-TEMR on the display the external temperature is displayed. If the external temperature falls below 3 ° With, at the provision of a key in the ignition lock in a position 1, the warning signal is distributed. At the same time on the display in a current of 10 seconds the point and a unit of measure of temperature (C/F) blink.

If during this moment other function is activated, and then the temperature again is requested, during remained time only optical warning signal blinks.

The warning signal repeats, if from the moment of its last emergence the temperature at least once raised to 6 ° With and again went down to 3 ° Page.

The warning signal of low external temperature does not exclude ice possibility at temperatures above 3 ° With, for example on bridges and the carriageway in a shadow.

Таймер* lay heating and lay ventilation

By means of the timer it is possible to include and disconnect directly lay heating and lay ventilation, and also to set inclusion time from 0.00 till 23.59 o'clock.

Direct inclusion - press within 3 seconds the EIN button, the light-emitting diode thus blinks.

Switching off - press the AUS button.

Input of time of inclusion - from the moment of key turn in the ignition lock in situation 1, the UHR function should be activated.

By ZEIT button pressing on the display there is a symbol of the fan and alternating figures 1 and 2, the inclusions indicating respectively on chosen or entered time.

After a choice of the demanded figure it is possible to enter appropriate time of inclusion.

The ZEIT button hold pressed until the point between indication of hours and minutes will start to blink.

Enter demanded time of inclusion by means of the h/DAT and min/DAT keys.

Again press the button, ZEIT - the point ceases to blink, time of inclusion of ventilation is programmed.

Activation of time of inclusion (from the moment of key turn in the ignition lock in situation 1) - after a choice of time of inclusion again press the SET/RES button, the light-emitting diode will be shone before automatic inclusion of lay heating and ventilation.

After that the light-emitting diode on the EIN button specifies that the system works.

Deactivation of time of inclusion - after input of time of inclusion press again the SET/RES button, the light-emitting diode will go out.

Set time of inclusion of lay ventilation can constantly be activated and деактивироваться by repeated pressing of the SET/RES button. Time remains in memory until the new will be entered.

At the car equipment management of system is made by the board computer by means of buttons, ZEIT and SET/RES.

Lay отопление* / Lay вентиляция*

Lay heating functions at external temperature below 16 ° With at taken out of the ignition lock a key or its turn in situation 0 or 1.

Using possibility of preliminary inclusion of lay heating during set time it is possible to sit down in already heated-up salon. Besides, in a frost it will facilitate to you cleaning of the car of snow and ice.

Period of operation of lay heating and ventilation makes 30 minutes. Because of high electricity consumption do not include system two times in a row, without having recharged before it the storage battery under way.

Usual mode of heating:

  • open moderately need all nozzles three levers of distribution of air and forward lattices;
  • close nozzles of fresh air on the end of the average console;
  • the rotary switch of amount of submitted air establish in a position "12 hours".

Conditioner

Open moderately need all nozzles three levers of distribution of air and forward lattices. Close nozzles of fresh air on the end of the average console.

Automatic central air of air

Warmed-up air arrives automatically through nozzles of heating of glasses in space for feet in front and behind. Regulation of distribution of air by means of buttons possibly only at key turn in the ignition lock in situation 1.

Both at a usual mode of heating of the car, and at included the conditioner and automatic central air of air, the temperature in salon can be regulated by means of the rotary switch or an adjusting roller of temperature only at key turn in the lock of ignition of century situation 1. At situation 0 heating occurs most intensively.

Keep in mind - lay heating works still some time after switching off (the light-emitting diode dies away).

Important instructions

If lay heating after at most two attempts of start-up does not join or is automatically disconnected, address for council on the BMW service.

Inclusion of lay heating in the closed rooms is categorically forbidden.

When filling surely switch off lay heating!

We recommend - in a warm season include for a while lay heating a minimum of times a month (прибл. 5 minutes).

At temperatures over 16 ° With arrive as follows: The timer - press on the 3rd second button A-TEMR, there is a letter E.

The board computer - press at the same time 3 seconds of button A-TEMR and ZEIT, there is "in" inscription. After that lay heating of 1 times (direct inclusion and switching off) can be included.

At external temperature over 16 ° With lay ventilation it can be used for обдува salon and temperature fall in it (the provision of a key in the lock of ignition are similar to key provisions at lay heating).

Air is forced by the fan of automatic system of heating or conditioning.

Usual mode of heating

  • Open moderately need all nozzles three levers; ventilation through nozzles of intake of fresh air in front or on the end of the average console is most effective;
  • the rotary switch of amount of submitted air establish in a position "12 hours".

Conditioner

Open moderately need of a nozzle; ventilation through lobbies or back nozzles is most effective.

Automatic central air of air

Air arrives automatically through nozzles on the dashboard in the chosen direction and demanded quantity. Therefore, for ensuring efficiency of an operating mode of lay ventilation, a nozzle should be completely open.

Automatic control of speed (темпостат)

Demanded speed of movement, since прибл. 40 km/h, can automatically be supported and be set.

1 — DISPERSAL

Slightly press the lever - speed of movement at the moment of pressing of the lever remains at further movement and is remembered. Each subsequent touch to the lever raises speed approximately on 1 km/h.

Press the lever and hold him in this situation - the car is dispersed without pressing but an accelerator pedal. Speed of movement at the moment of an otpuskaniye of the lever remains at further movement and is remembered.

In case the fixed speed was exceeded more than on 10 km/h throughout over 1 minute, the mode of its maintenance interrupts and it is necessary for activating again.

On BMW 525tds, and also the cars equipped with system of stabilization of adjustment of stability and traction effort (ASC T) *, the mode of maintenance of speed interrupts and should be restored again after the fixed speed was exceeded on 16 km/h or underestimated by 8 km/h.

2 — DELAY

Press and hold the lever in this situation - if you moved with the fixed speed, the car reduces speed owing to automatic reduction of supply of fuel. Speed of movement at present an otpuskaniye of the lever remains at further movement and is remembered.

On BMW 525tds, and also the cars equipped with system of automatic control of stability and traction effort (ASC T), the car reduces speed owing to automatic reduction of supply of fuel Speed of movement at present of an otpuskaniye of the lever remains at further movement and is remembered.

Slightly press the lever - if you already moved with the fixed speed, each subsequent touch to the lever reduces speed approximately on 1 km/h. On BMW 525tds, and also the cars equipped with system of automatic control of stability and traction effort (ASC T), speed remains and remembered. Each subsequent touch to the lever reduces speed approximately on 1 km/h.

3 — RESTORATION OF THE LAST VALUE OF SPEED

Shortly press the lever from an end face - the speed entered into memory last time, it is reached again and remains at movement.

4 — SWITCHING OFF

Slightly press the lever - regulation of speed is disconnected irrespective of traffic conditions and a road situation.

Besides, automatic control of speed is disconnected automatically at strong delay of a course over 1.5 m/s2 in comparison with set, for example, on liftings, during the braking and inclusion of coupling or switching of the lever of an automatic transmission from situation D in situation N.

At a stop

Do not include automatic control of speed, if:

  • roads abound with abrupt turns;
  • heavy traffic does not allow movement with constant speed;
  • road slippery (snow, rain, ice) or paving insufficiently firm (stones, sand).

the engine data on the set speed are extinguished.

Acoustic anticreeping сигнализация*

In attempt of unauthorized opening of one of doors, a cowl or a luggage carrier for 30 seconds the siren and ignition works is disconnected. At the same time for 5 minutes the system of the alarm light system * joins, the passing beam blinks in beat works of system emergency light сигнализации*.

If unauthorized actions proceed, attempts of start-up of the engine, dismantle of automobile radio become, manipulations with a ware box or the storage battery are conducted, repeatedly for 30 seconds the siren joins.

In attempt to move the car after overcoming of short distance the siren is distributed.

Inclusion and switching off of a siren occurs at the same time to inclusion and switching off of the anti-theft device via the door lock, or system of remote control.

At the included system in the average console within 36 hours the light-emitting diode burns.

If the light-emitting diode at inclusion of system blinks, or doors, an engine cowl, a trunk lid, or a ware box are not closed completely. At system inclusion the light-emitting diode blinks in case one of lateral glasses openly more than on admissible distance. In case it did not close, the system takes on protection in 10 seconds everything that is closed completely and the light-emitting diode is shone constantly.

At system shutdown the light-emitting diode dies away. If shutdown occurs after the light-emitting diode went out (after 36 hours), it flashes again for short time.

In case the alarm system worked, the light-emitting diode blinks in a current of 36 hours and specifies t. the lake on perfect attempt of opening of the car or its stealing. It dies away after system shutdown.

The luggage carrier is available and at the activated system. The light-emitting diode blinking (10 seconds) should pay your attention that the trunk lid though is closed, but is not blocked (turn a key to the right and take out).

The anticreeping alarm system with additional protection of salon and the sensor working on change of a corner of a bias автомобиля*

At destruction back or one of lateral glasses (all lateral glasses should be closed, however, for salon ventilation in hot weather they can remain open on 10 mm) - the siren is distributed. The system reacts as well in case position of the car changes, for example, in attempts of unauthorized dismantle of wheels or an otbuksirovaniya - on change of a corner of a bias of the car works the sensor.

If one of lateral windows is slightly opened more than on admissible size, the light-emitting diode blinks. In case it do not close, the system takes on protection in 10 seconds all closed windows and a light-emitting diode is shone constantly.

For prevention of undesirable operation of the alarm system from the sensor reacting to change of a tilt angle of the car, for example, at transportation by train, on the ferry etc., the sensor can be switched off.

Directly after turning on of the anticreeping alarm system repeat once again process of its inclusion (i.e. turn again a key in a position of inclusion of anticreeping system or at remote control - press shortly the button 2).

The light-emitting diode dies away and lights up again. Now the sensor is switched off to the following blackout all alarm systems.

Keep in mind: the wrong installation of loudspeakers in the doorway can negatively affect functioning of the device of protection of windows.

If normal shutdown of system is impossible, in an emergency case follows will arrive as follows:

  • open a door a key (for 30 seconds the siren works);
  • sit down in the car, close a door and turn the ignition key in a position 1 (again, for 30 seconds the siren works);
  • wait, the light-emitting diode (after прибл will not go out yet. 15 minutes)

During this time a door do not open; the ignition key remains in a position 1. After that the system is disconnected

Onboard компьютер*

1 — Keys of input of numerical data
2 — the Key of switching of units of measure
3 — Digital indication
4 — Fototranzistor for automatic control of brightness of indication
5 — the Key of start-up/feet of SET/RES
6 — Light-emitting diodes (LED)
7 — Keys of a call of information
For reliable and economic driving of the car on demand on the display the following information stands out:
UHR/DAT — Time and date
VERBR — Average fuel consumption on two sites of a way
REICHW — the Expected stock of a course
GESCHW — Average speed
A-TEMR — External temperature
ZEIT — the Stop watch or 2 terms of inclusion lay heating/ventilation
ANK — the Expected arrival time
DIST — the Remained distance to a purpose of visit
LIMIT — Speed limit
CODE — Anticreeping protection

The board computer is ready to work at key turn in the ignition lock in situation 1.

Data input in interests of safety make always prior to the beginning of a trip or at the motionless car.

By pressing of the corresponding key of a call of information you can request the following information without preliminary input:

  • average speed;
  • average fuel consumption on sites of a way 1 and 2;
  • external temperature.

Having pressed the corresponding key of a call, pressing the SET/RES (5) key, you can start or stop information again:

  • average speed;
  • average fuel consumption on sites 1 and 2;
  • the timer or, if necessary, 2 terms of inclusion lay heating/ventilation, and having pressed the UHR key, you can cause or extinguish a signal of a sound hourly reminder of time.

Order of input of numerical data:

  • time and date;
  • speed limit;
  • terms of inclusion lay heating/ventilation;
  • distances to a purpose of visit (on the basis of what it is timed arrivals);
  • anticreeping protection it is described further.

By means of a key of switching of units of measure (2) each type of information (except a code) after a call can be displayed by its corresponding key for choice in metric or English units.

At current interruption of supply in a chain, for example, at replacement of the storage battery, all data in memory are erased.

At restoration of a food it is necessary to enter again data on time, date and inclusion time, distance and speed limit.

At indication of hindrances of "RRRR" address on the BMW service.

Remote control

Press shortly the lever of the switch of indexes of turn.

Information appears in addition in a combination of devices (except for BMW 520i, 525tds - in preparation) and can consistently be requested.

Information indication by the board computer goes irrespective of its indication to combinations of devices.

To extinguish indication in a combination of devices press the button of the control and alarm display in combinations of devices or the CODE key.

Messages of the control and alarm display extinguish the image of data of the board computer.

If you want to receive all information on a combination of devices:

  • press the lever of the switch of indexes of turn 3 seconds, on the display there will be Prog 1 inscription (in the board computer - Р1);
  • press the SET/RES key.

If on a combination of devices you want to have a certain sample of information, in this case:

  • press the lever of the switch of indexes of turn 3 seconds, on the display there will be Prog 1 inscription (in the board computer - Р1);
  • press the corresponding key of a call of information.

At calculation of an average expense on two sites and at installation of terms of inclusion lay heating/ventilation, observe the following rule. If both expenses, for example, have to be displayed, the VERBR key is necessary for pressing twice. If only the expense on the second, instead of on the first site, however, has to be displayed, after pressing of the VERBR key press a key of switching of units of measure of km/mls (by further pressing of a key of switching the expense on the first and second sites is alternately specified).

For a call the display of the first and second terms of inclusion lay heating/ventilation affect similarly.

  • Press the SET/RES key.

Input and information call on the board computer

Keep in mind! Input is made in decimal sequence:

Unreal numerical data are not perceived by system.

At input of the new number, the numbers which were in memory are erased: numerical data can be entered in any sequence of decimal categories.

For data recording in memory it is required to press the SET/RES button.

Numerical value raises respectively on unit after each pressing of a key or every other half-seconds at the pressed key.

 

Input: keys press in the represented sequence

Call: Press the next key of a call of necessary information

Time (Date)

Average fuel consumption on sites 1 or 2

Course stock

Average speed

External temperature

The timer - start

-->

Current time

Stop

-->

Lay heating/ventilation - the Live broadcast

-->

Live broadcast

-->

Input of time of inclusion 1 or 2

The remained distance to a purpose of visit

DIST

DIST

Expected arrival time

 

ANK

Speed limit or limit

 

Code, anticreeping protection:

  • activation

Key in situation 1

 

  • deactivation

Key in situation 1 or 2

(to enter a code)
or to start двигатепь

 


 

Instruction on input and call

Time (Date)

At indication — UHR (after current interruption of supply) again enter time data. Hours after data input can be started to within a second by means of the SET/RES key (for example, on time signal by radio). Input of date is carried out similar to time input. After pressing of the SET/RES key there is an indication of data of year. If necessary, enter new numbers and press once again the SET/RES key. Indication of date can appear otherwise - for this purpose press two times the UHR/DAT key. For correction of time or date change numerical value and then press the SET/RES button. A signal of hour - after the UHR key press the SET/RES key - there is a symbol of the activated function of a sound signal. Before the expiration of each full hour the signal is distributed and in a combination of devices for a while there is time indication. Switching off - at the activated inquiry of time of UHR press the SET/RES key. Time and date call at key turn in the ignition lock in situation 0 - press the UHR/DAT key.

Average fuel consumption on sites 1 or 2

After a start of motion by SET/RES button pressing the computer makes new calculation. By repeated pressing of the VERBR key the average expense for the first and second sites gets out alternately - after short time there is a digital indication of the chosen fuel consumption.

Course stock

The plus () before displayed value means a "full" fuel tank.

Average speed

After a start of motion by SET/RES button pressing the computer makes new calculation.

External temperature

If the external temperature falls below 3 ° With, the warning signal is distributed, the temperature is displayed automatically and units of measure of temperature blink within 8 seconds; in a combination of devices the temperature is displayed.

The timer - start

At cars with lay a heating / entilyatsiya function of the timer (stop watch) is absent. At the working timer the light-emitting diode is shone.

Current time

The light-emitting diode blinks. Again press the ZEIT key - there will be an indication of the working timer.

Stop

Counting of the current time stops, if there is other information. It is usually enough to press the SET/RES key. By repeated pressing of the SET/RES key new counting of time is started.

By pressing of the ZEIT key there is an indication of a condition lay heating/ventilation. A live broadcast in the provision of a key in the ignition lock in a position 1.

Lay heating/ventilation - the Live broadcast

Live broadcast

Switching off in situation 0. At the pressed key of inquiry of time press only the SET/RES key.

Input of time of inclusion 1 or 2

Data input is possible only if hours are included. In the ZEIT mode press once a key, for input of the second term of inclusion a key press once again (the instruction on the display).

At a being shone light-emitting diode period of operation, lay heating/ventilation can be set within 30 minutes, since the start-up moment. In operating time lay heating/ventilation the light-emitting diode blinks. It dies away at system shutdown.

Correction of time of inclusion is carried out similar to information input. After input of time of inclusion 1 or the 2nd system joins in SET/RES key pressing.

At activation the corresponding light-emitting diode is shone.

The remained distance to a purpose of visit

If the entered distance is passed, further counting goes with a minus sign.

Expected arrival time

 

The expected arrival time is constantly corrected depending on a way of driving. The call is possible only in case the distance was set in advance. After distance passing - by pressing of the ANK key there are DIST data. When switching from a position of any other key appears: — ANK.

Speed limit or limit

 

The light-emitting diode is shone: at excess of the set speed the sound signal is distributed and the corresponding light-emitting diode blinks, in a combination of devices for a while there is a speed limit put in memory. By repeated pressing of a key of a call of information the warning signal is disconnected, the light-emitting diode dies away, however the value put in memory remains. Input of speed of movement at the moment - at the pressed LIMIT key press the SET/RES key.

 

Code, anticreeping protection:

  • activation

Code numbers from 0000 to 9999 can be entered.

Surely remember code number!

The key in the ignition lock in situation 0 - a light-emitting diode is shone 36 hours.

  • deactivation

After the third wrong input of a code or the third attempt of start-up for 30 seconds the siren is distributed!

Additional explanations on the board computer

(Modification of information program possibly only after pressing of the corresponding key of a call of information).

Time and date are caused alternately by a way of repeated pressing of a key. Input of year serves for the accounting of leap-year at date indication.
By means of concrete team of start of new calculation average fuel consumption for all trip and for a certain site of a way at the same time can pay off.
The expected stock of a course calculated on the basis of data of a reserve of fuel and taking into account style of driving is induced. If on the display four segments blink, the stock of a course makes less than 15 km. It is necessary to refuel! The board computer registers filling if a key in the lock of ignition will turn in situation 1 or 0 and more than 5 liters are filled in. The plus () before numerical value specifies that the valid stock of a course is more than India of tsiruyemy value that is a consequence of restriction at measurement of level of fuel.
The warning signal repeats, if from the moment of a final warning the temperature at least once raised to 6 ° With and again went down to 3 ° Page. The warning signal does not exclude ice possibility at temperatures above 3 ° With, for example on bridges and the carriageway in a shadow.
Timer: Max, makes operating time of the timer 99 hours and 59 minutes. Time is displayed on the display at first in seconds and the tenth seconds, after one minute in minutes and seconds, after one hour in hours and minutes.

Lay heating/ventilation: By repeated pressing of this button consistently appear, a system condition at present, time of inclusion 1, time of inclusion 2, repetition etc.

Speed limit can both to be set again, and to be caused. The prevention repeats, if speed limit was underestimated once at least by 5 km/h.
At the included system under control there is an engine cowl, a radio receiver, a starter. If the cowl is not closed or dismantled a radio receiver, at key turn in the ignition lock in situation About a light-emitting diode blinks during прибл. 10 seconds. At the included system a key in the lock of ignition turn in situation 1 or 2 - a signal of a gong and indication - Code mean readiness for code input. At starter inclusion without input of a code the long gong and the engine is distributed not started.

Deactivation in case you forgot code number:

  • disconnect the accumulator for 5 minutes;
  • turn a key in the ignition lock in situation 1, the siren will work;
  • on the display there is an indication of a 15-minute interval of time counted back;
  • after 15 minutes the engine can be started.

If you remembered code number, can enter it at once, without waiting, while will expire 15 minutes:

  • press the CODE key; press the SET/RES key;
  • start the engine.

Ski мешок*

In a bag reliably and it is accurately possible to transport to three, about four pairs skis are maximum.

The length of a bag makes 1.20 m. Taking into account additional space in a luggage carrier skis in length to 2.10 m can keep within. When loading several pairs skis the available place, because of narrowing of a ski bag, decreases, therefore only two pairs skis with identical length of 2.10 m can be transported.

Loading of a ski bag

Average armrest of a back seat cast away completely down, unbutton above a "repeyny" fastener of cover of dredging.

Wring out a little back the lever and take out an average armrest.

At obraty installation of an average armrest watch that ledges of a fixing part entered in back directing in dredging.


Press the round button - the cover of a loading opening in a luggage carrier is deblocked.

After that uncouple from above a collar and lay down.

Ski bag lay between forward seats. The fastener "lightning" is intended for the best access to the subjects laid in a bag and the best prosy-haniye of a ski bag.

Cover of a loading opening fix by means of the magnetic holder on the bottom party of the shelf of a back.

The request to watch that skis kept within a bag only pure and sharp edges did not spoil surrounding subjects.

BMW Touring

Cast away an average armrest of a back seat - do not dismantle it.

Unbutton above a "repeyny" fastener of cover of dredging and put it from above on an armrest.

Press down the button and cast away forward a cover.

Press the button - the cover of loading space is deblocked.

If you plan not to use a ski bag a long time, before that how to lay, dry it.

It is recommended from time to time, depending on frequency of using, to clear a waterproof ski bag of thawed snow and condensate.

Work automobile радиоприемника*

Quality of reception and reproduction of a radio receiver depends on a reception place, and also height and aerial prompting.

The hindrances caused, for example, by power lines, cars with weak suppression of hindrances or not not equipped with system of suppression of hindrances, and also buildings or natural obstacles, at daily operation of the car can cause noise hindrances not giving in to regulation, despite their complete suppression in own car.

The atmospheric phenomena, such as, a fog, a rain or snowfall, also can disturb radio reception.

With increase of intensity of solar radiation quality of reception on long, average and short waves worsens. The best reception in this wave band is reached at night since at this time working waves are reflected in an ionosphere most strongly.

On wave bands of DV, SV and KB distant reception, t is possible. to a wave extend not only as terrestrial radio-waves along an earth surface, but also as well as the spatial radio-waves reflected from an ionosphere.

For the physical reasons quality of reproduction in a range of average waves not such good, as in a range of ultra-short waves (VHF). However, the range of average waves, because of good distant reception, especially at night, is used by a large number of transmitters though hindrances because of their high concentration not to avoid.

Unlike VHF range sounding in MB range more muffled.

Range of action of long-wave radio transmitters exceeds range of action of the srednevolnovy.

In a range of short waves the greatest range of action. The greatest number of transmitters and the best sounding, with the known, caused physical reasons restrictions, you will find in a range of 49 meters.

In a range of VHF (FM) *, in comparison with other ranges, the best sounding. However, here reception of only a small number of stations, t is possible. to range of operation of transmitters because of rectilinear distribution of waves makes only 80 km. In process of removal from it there are noise hindrances and in the washed-up account the transmitter will not be heard absolutely or will be forced out by more powerful in which range of action you will appear. At emergence of natural this sort of hindrances it is necessary to choose other station.

On VHF necessary there is more frequent switching from one radio station on another.

Stereophonic reception is possible only on VHF. The hindrances arising in process of removal from the transmitter, can appear earlier, than at monophonic radio reception. In this case we recommend switching for monoreception or a choice of other transmitter with stereophonic translation.

Hissing, crackling, and also sound splashes arise, if as a result of buildings - the automobile radio receiver during fractions of a second accepts the same signal of the transmitter two or more time. It fast change of loudness speaks also.

Long hissing appears mostly how you left an area of coverage of station or in case of obviously expressed zone of a zateneniye. Elimination of noise possibly only control for stronger transmitter.

Sound disappearance - especially in MB (AM) range - comes owing to imposing of terrestrial and spatial waves in a place of reception and is often accompanied by reception distortion.

Vibrating hissing arises at a zateneniye of direct link from the transmitter to the receiver owing to existence of large structures or natural obstacles.

At movement on the avenue there is so-called "an intaking sound effect".

Automobile радиотелефон*

According to the BMW firm instruction at additional installation of a radio telephone, for the purpose of providing a reserve of the electric power it is necessary to establish the second storage battery of the corresponding capacity with the relay disconnecting it from an electric chain of the car. Experts of the BMW service willingly will consult you on this matter.

Important recommendation:

Application of mobile communication systems (an automobile radio telephone, radio devices etc.), not provided to operation on your car, can cause hindrances. The BMW firm unable to supervise each product and does not bear, therefore any responsibility.

In this regard, before buying similar system, we recommend to address for council on the BMW service.

For ensuring reliable operation of your BMW do not establish any mobile phones or other equipment of the communication which aerial should be in salon.

Engine start-up

  • Cock the parking brake; the lever of gear shifting establish in neutral situation (on an automatic transmission in situation P or N);
  • switch off, whenever possible, everything consumers of a current, especially at low temperatures, and hold squeezed out a coupling pedal;
  • DO NOT PRESS THE ACCELERATOR PEDAL

If the engine in the first attempt is not started, for example, in the overcooled or heated-up condition - a pedal of an accelerator squeeze out only half.

Have also in a look: start of a starter should not be too short, but also should not exceed 20 seconds. The ignition key release at once after the beginning of operation of the engine.

Repetition of start-up of the engine - a key in the ignition lock before repeated start-up turn in situation 0 or 1, for prevention of inclusion of a starter at even rotating engine.
Repeat start after a small pause did not throw a spark plug.
At a hard frost - not to overload the accumulator before new start-up it is recommended to maintain a small pause (прибл. 20-30 seconds).

BMW 525tds

At the cold engine

Key in the lock of ignition hold in situation 2 until the orange control lamp "time of a prestarting warming up" will go out.

Starter include until the engine will not be started. At especially low temperatures a starter include no more than for 40 seconds.

The pressing a pedal of an accelerator does not render influence on start-up process.

At the heated-up engine

If the orange control lamp "time of a prestarting warming up" does not light up, start the engine at once.

Air removal from diesel fuel system

In case of complete fuel consumption air from fuel system, as a rule, should not be removed.

If, however, there will be difficulties at start-up, it is necessary to include a starter on прибл. 20 seconds.

The optimum number of turns is idling established automatically.

The engine should not be warmed up idling - it is recommended to get under way at once from a place on average turns.

Engine stop

Key in the lock of ignition turn in situation 1 or 0.

Economic driving

Fuel consumption depends first of all on style of driving of the car.

  • Do not warm up the engine idling, and get under way at once; avoid thus long operation of the engine idling.
  • Use the first transfer only for a troganiye from a place and be never dispersed on it with "full gas".
  • In due time switch speeds and drive the car on raised, more economic transfers - the third, the fourth or the fifth.
  • Avoid long movement with the maximum loading.
  • Avoid excess weight in the car.
  • Watch pressure of air in tires.

Besides keep in mind: economic driving reduces harmful issue of the fulfilled gases, and a car shumnost.

The car never leave without supervision with working engine - it represents big potential danger.

Running in

During a running in can happen that switching of speeds, management etc. appear in the beginning a little inconvenient. However, as a result extra earnings it is the phenomenon after a while disappears.

Please, observe the following instructions your car served as it is possible more long, and was the most economic.

Engine and main transfer of the back bridge

To 1000 km of run

Move with variable turns and variable speed, without exceeding thus 140 km/h.

Essentially avoid the maximum supply of fuel ("full gas"), and also other-wordly pressing an accelerator pedal - the so-called provisions "Kick-Down"!

Since 100 km of run it is possible to raise turns and speed gradually.

If in use the car one of these units is replaced new, instructions on a running in should be observed and in this case.

Tires

During a running in coupling of new tires with the road yet is not optimum that is caused by technology of their manufacturing. Therefore during the first 300 km the moderate manner of driving is recommended.

Brake system

For achievement of uniform and optimum factor of a friction at run of the first 500 km it is necessary to brake mainly on the average a delay range. At new frictional overlays of brake shoes it is necessary to avoid repeated sharp braking, in particular on high speeds, or long loadings, for example, at movement through passes.

Frictional overlays of brake shoes and disks are earned extra optimum after run of 500 km and under the specified conditions of a running in.

The parking brake is independent, independent of a foot brake, system with separate brake drums, and should be earned extra also.

If efficiency of braking considerably decreases, extra earnings can be made by the driver. If that is allowed by the road, weather and transport traffic conditions, tighten slightly the lever of the parking brake at speed прибл. 40 km/h, yet do not become appreciable resistance. After that the lever tighten more strongly (move on one tooth of sector upward) and in this situation move прибл. 400 m. Then again completely release the lever.

Fuel consumption

Fuel consumption is defined according to a standard technique of carrying out tests (DIN 70030/1 a part 1). It is not so identical to average fuel consumption which style of driving, car loading, a road condition, intensity of movement and a transport stream, weather, pressure of air in tires and t depends on many factors, such as. fuels on DIN*.

Practical recommendations

Do not warm up the engine idling.

Only at very low external temperatures, for providing high-grade greasing, warm up the cold engine on the raised turns of idling about half-minute.

But the cold engine do not develop high frequency of rotation of a cranked shaft since it reduces term of its service.

At loads of the engine - dispersal, liftings - whenever possible move with frequency of rotation of a cranked shaft more than 1500 rpm and make timely switching on a low gear, in particular on liftings.

At coupling switching off completely squeeze out a coupling pedal, at movement a foot do not hold on a coupling pedal.

During movement do not hold a foot on a brake pedal. Even easy, but the long pressing a pedal of a brake can have a consequence an overheat, wear of brake slips and possible refusal of brake system.


After a long trip on low speeds (movement in the city, in a column) as soon as it becomes possible, is recommended to pass some kilometers with frequency of rotation over 3000 rpm. Thanks to it possible formation of soot is eliminated.


At movement on wet or gryadny roads between tires and a road cloth the water wedge can be formed. This effect known under the name hydroplaning, can cause partial or complete loss of contact to a road cloth, control loss over the car and loss of brake ability of the car. Therefore, on wet roads reduce speed of movement.

The trunk lid at movement should be closed the fulfilled gases did not get to salon. However, if because of dimensions of transported cargo it is necessary to move with an open luggage carrier, it is necessary to close all windows, and also it is shifted - the lifted hatch, and to strengthen compulsory ventilation of salon.

Do not put any heavy or firm subjects on the back shelf since when braking they can wound passengers.

Clothes hang up on hooks so that it did not block the review to the driver.

Do not hang up on hooks of heavy subjects in order to avoid traumas when braking.

*DIN - Deutsche Industrie-Norm. Industrial Germany standard (hereinafter).

Engine cowl

Deblokirovk - pull the lever located at the left under the dashboard.

Prior to the beginning of carrying out any works in podkapotny space stop and cool the engine.

Before beginning works with elektriky, at repair and servicing, especially in podkapotny space, disconnect the storage battery.

The inadequate address with details and materials at work with the car increases risk of traumas. Therefore, observe the corresponding instructions and instructions. If you are not familiar with safety regulations subject to obligatory observance, charge work to experts of the BMW service.


Thanks to the built-in spring mechanism the cowl automatically is pushed forward and it can be opened.

Lighting podkapotny пространства*

The lamp burns at an open cowl and included illumination of the car.

Closing - a cowl press at the same time from both parties before obviously heard click.

Be convinced of that the cowl is blocked - try to raise it.

If during movement you find out that the cowl is not blocked correctly, immediately stop and close it.

Bolts of fastening of wheels with замком*

Remove a cap - if necessary by means of a key.

Insert a key into the lock and, turning it on 90 °. to the right or to the left, remove the lock.

  • 0-to lock
  • 1-to unlock

The lock is got in return sequence. Taking out a key, hold it!


Bolt with the lock mount opposite to the gate.

We recommend to store one key in a set of the tool enclosed to the car it always was near at hand, for example, in a workshop.

Confidential bolts of fastening of wheels

1 — the Protective cap (it is not established on wheels with a protective cover of bolts)
2 — the Bolt under an adapter
3 — the Adapter (2 pieces in a set of the tool enclosed to the car)

Wheel dismantle

  • Protective cap (1) turn to the left the combined key and remove;
  • take out from a tool set (on BMW Touring - under a forward folding cover in a cargo compartment) an adapter (3) and insert into a bolt;
  • unscrew a bolt (2).

After that remove an adapter and dress a protective cap.

Табличку* with a code of an adapter store in a reliable place.

It is shifted - the lifted hatch

Actions in case of malfunction of electric system:

Uncover, move it is shifted - the lifted hatch in the demanded direction by means of a natural by an internal shestigrannik (is in a set of the tool enclosed to the car).

Address on the BMW service for the purpose of defect elimination.

The double it is shifted - the lifted hatch

Actions in case of malfunction of electric system:

Closing of the forward hatch - remove those a cover before a hatch opening, insert a natural an internal shestigrannik (is in a set of the tool enclosed to the car) in a shestigrannik of a drive of the engine (see an illustration above) and rotate counter-clockwise.

Closing of the back hatch - dismantle a cap behind a hatch opening, if necessary act with a screw-driver.

Rotate a natural an internal shestigrannik only counter-clockwise.

This hatch can close, be not to opened only manually at all, and before it it is necessary to close:

  • at first the forward;
  • but only then back hatch.

When closing both hatches observe the following. Before inserting a key, surely extend by means of its flat end the plug located round a shestigrannik. After hatches were closed, fix it in initial situation.

For elimination of defect address on the BMW service.

Temporary termination of operation of the car

If the car is put on parking more than for three months, in order to avoid emergence of any damage charge to experts of the BMW service to carry out the following works:

  1. To wash up, preserve and in addition to process the engine, podkapotny space, the bottom of a body, an axis and units according to factory instructions. To wash up the car outside and to clear salon, after that to process a paint and varnish and chromic covering. To clear rubber a sealant of a cowl and doors, to strew them with talc or to grease with glyceric oil.
  2. To replace engine oil and the oil filter at the engine heated up to working temperature. As additional anticorrosive protection of the engine in fuel anticorrosive means according to the instruction of the manufacturer can be added.
  3. To check level and concentration of cooling liquid and, if necessary, to add.
  4. To check electrolit level in accumulators, if necessary to add the distilled water.
  5. To merge liquid from tanks and pipelines of stekloomyvatel.
  6. Completely to fill a fuel tank in order to avoid formation of condensate.
  7. To increase pressure in tires to the 4th bar.

How. to put the car on parking, dry manual and foot parking brakes to avoid corrosion of brake disks and drums.

The car put on parking in a dry and well aired room, include a backing (on an automatic transmission - situation P), if necessary enclose under wheels persistent wedges, do not tighten the parking brake!

Dismantle storage batteries, recharge and store them in a cool and not freezing through room. Not later than in three months recharge batteries, otherwise they will fail!

The conditioner should turn on for short time at least once a month (especially in a cold season) since differently there is a danger of drying of hermetic of a shaft of the compressor therefore cooling means can flow out.

Thus the engine should be warmed up to working temperature (the index of temperature should be approximately in the middle between two color fields) to avoid internal corrosion. On cars without the conditioner the engine during parking should not be started.

At engine start indoors take care of sufficient ventilation not to inhale the poisonous fulfilled gases.

If at the same time the car is struck off the register, do not pass term of repeated registration, differently there is void "A permission to operation".

Abroad observe the corresponding administrative instructions!

The operation beginning after preservation

Recharge storage batteries, if necessary - replace.

Charge to experts of the BMW service to carry out TO-1.

Parking time during which the storage battery is disconnected, is not considered by indication of intervals of maintenance.

For the purpose of observance of a biennial interval of replacement of brake liquid, this period of time should be considered surely, replacement of brake liquid is necessary for making respectively before the symbol of hours will light up.

Winter operation

Winter months for which changeable weather is characteristic, demand the car for ensuring safe and problemless driving not only change of style of driving, but also preparation for them.

At operation in the winter coupling of tires with the road considerably worsens, therefore the driver in each situation should reckon with longer brake way.

Before colds it is expedient to carry out preparation of the car for winter operation on the BMW service.
Observe the corresponding instructions on replacement of oil and do it whenever possible before colds.

For manual and automatic transmissions, the main transfer of the back bridge, hydraulic actuators of a steering, brake system and system of regulation of a road gleam any preparatory activities, except for check of level of oil, are not required.

Serial delivery includes addition into cooling liquid of durable antifreeze possessing anticorrosive properties. Necessary for ensuring anticorrosive protection concentration should make 40 % during the whole year that corresponds to frost resistance apprx.-27 ° to Page.

Apply only the allowed durable antifreezes which are not containing nitrites and аминов. These means are known on the BMW service.

Cooling liquid should be replaced every two years. Before the beginning of colds and in a cold season check frost resistance of cooling liquid. Thus check cooling system on tightness and, if necessary, replace the burst and hardened hoses.

Regulation of temperature of the engine via the thermostat occurs automatically depending on load of the engine and external temperature. Therefore do not cover a radiator.

Well charged storage battery is a condition of reliable start-up of the engine. During cold time its capacity is lower, and load of it is higher, than in the summer.

Apply only the resolved means for ухода* behind locks.

They also prevent their freezing. If, despite all precautionary measures or owing to defect of a heating system of the door lock it freezes, it can be defrozen heated up before this key. Do not apply some any anti-icers - they promote degreasing and reduce operational reliability of locks.

For primerzaniye prevention rubber details - a sealant of doors, a cowl and a trunk lid should be processed special means for care of rubber уплотнителей* or silicone аэрозолью*.

The paint and varnish covering of the car, and also the chromeplated and polished details before colds, and also in winter months should be preserved corresponding средствами*.

*mozhno to receive on the BMW service.


«on page back
19. Schematic electric circuits
on page forward»
21. System of onboard diagnostics - a principle of functioning and codes of malfunctions