Removal and installation of the electronic control unit (ECU). BMW the 5th E28/E34 series (from 1981 to 1993 of release)
Repair of BMW E28 and series E34 from 1981 to 1993
1. Cars of the BMW brand of 5-series
2. Engine
3. Cooling system
4. Power supply system
5. Ignition system
6. Control systems of the engine and decrease in toxicity of the fulfilled gases
6.1. General information
6.2. General information about self-diagnostics of a control system by the Motronic engine
6.3. Removal and installation of the electronic control unit (ECU)
6.4. Information sensors
6.5. System of ventilation of a case (PCV)
6.6. Catching system паров gasoline (EVAP)
7. System of production of the fulfilled gases
8. Coupling
9. Manual box of gear shifting (RKPP) and automatic transmission (AT)
10. Transmission line
11. Steering and suspension bracket
12. Brake system
13. Body
14. Control body sizes
15. Heater and air conditioner
16. System of onboard electric equipment
17. Routine maintenance of the car
18. Size table and adjusting data
19. Schematic electric circuits
20. Governing bodies and operation receptions
21. System of onboard diagnostics - a principle of functioning and codes of malfunctions
 













6-3-snyatie-i-ustanovka-ehlektronnogo-bloka-upravleniya-ecu.html

6.3. Removal and installation of the electronic control unit (ECU)

Removal

The electronic control unit (ECU) is located in an impellent compartment on the right (look Head the Power supply system).

 PERFORMANCE ORDER

  1. Disconnect a negative wire of the storage battery.

If the radio receiver on your car is equipped with system of protection against abduction, before shutdown of the battery be convinced that the correct code of activization is known. Before a detachment of a wire apply for information to the Section System of protection of an audiosystem from theft and language of an instrument guard.


If after battery connection on the display of the dashboard there is a message in other language, for procedure of installation of language address to the Section System of protection of an audiosystem from theft and language of an instrument guard.

  1. On models ECU on the right side of an impellent compartment uncover access (look Head the Power supply system).
  2. If ECU is located in the car, uncover access on the right side.
  3. Disconnect from ECU electric sockets.
  4. Unscrew from ECU arm fastening bolts.
  5. Carefully remove ECU.

Avoid ECU damage by a static electricity, using rubber gloves and without touching socket contacts.

  Installation

Installation is return to removal.


«on page back
6.2. General information about self-diagnostics of a control system by the Motronic engine
on page forward»
6.4. Information sensors