Removal and инсталляция of assembly of the выпекай абсорбер shock and twisted прыгай. BMW the 5th E28 / E34 series (from 1981 т. 1993 of релиз)
Repair of BMW E28 and series E34 from 1981 т. 1993
1. Автомобили of the пожар BMW of 5-series
2. Ядро
3. Cooling система
4. Сила supply систему
5. Ignition система
6. Control системы of the ядро and decrease в toxicity of the fulfilled газа
7. Система of production of the fulfilled газа
8. Coupling
9. Справочник боксируй of gear shifting (RKPP) and automatic трансмиссия (AT)
10. Трансмиссия Лину
11. Проверили бы Steering and временное прекращение
11.1. Steering
11.2. Нападающего временное прекращение проверили бы
11.3. Временное прекращение проверили бы of жарься wheels
11.3.1. Генерал информатион
11.3.2. Removal and инсталляция of assembly of the выпекай абсорбер shock and twisted прыгай
11.3.3. Removal and инсталляция of a бар of the жарься stabilizer
11.3.4. Removal and инсталляция of жарься продольное levers
11.3.5. Replacement of bearings of жарься wheels
11.3.6. Diagnostics of malfunctions of a временное прекращение проверили бы of жарься wheels
12. Жердь систему
13. Body
14. Control body sizes
15. Heater and поведение conditioner
16. Система of onboard electric оборудование
17. Навык maintenance of the автомобиль
18. Size table and adjusting data
19. Schematic electric circuits
20. Governing bodies and операция receptions
21. Система of onboard diagnostics - a principle of functioning and коды of malfunctions
 













11-3-2-snyatie-i-ustanovka-sborki-zadnego-amortizatora-i-vitojj-pruzhiny.html

11.3.2. Removal and инсталляция of assembly of the выпекай абсорбер shock and twisted прыгай

Removal

Though shock-absorbers always wear вне моды at the семя назначил бы время, surely replace the left and right shock-absorbers в pair тонну prevent violation of controllability and обмен денег of a нормально course of the автомобиль.


 ПРОИЗВОДИТЕЛЬНОСТЬ ЧИН

  1. Релиз bolts of fastening of wheels, then блокируй нападающего wheels. Тонна Poddomkratta the автомобиль and reliably establish it on на одной оси поддержку. Remove wheels.
  1. Give the bottom стучит of fastening of the абсорберы shock.
  1. On earlier модели unbend a covering в a жалованье лжи compartment таким образом тонна provide access тонна the топа фиксацию nuts. On later модели for this чистую позу at вершину remove a pillow of a выпекай seat (see. Head the Body), then give two bolts of fastening of a жарься of a выпекай seat and remove a жарься. Prop up the продольное lever a Джека and give the топ nuts of fastening.
  1. Lower a Джека and remove the абсорберы shock and laying. Тонна отдельных the абсорберов shock from a прыгай, address тонна the Section rack or абсорбер shock Replacement / a twisted прыгай.

Инсталляция

 ПРОИЗВОДИТЕЛЬНОСТЬ ЧИН

  1. Инсталляция make upside-down. Чет. forget тонна establish laying between the топ of the абсорберы shock and a body. Tighten the топ nuts with demanded effort. Чет. tighten the bottom стучит, yet чет. lower the автомобиль on the earth.
  2. Lower the автомобиль, and having established it at нормально working height, tighten the bottom стучит with demanded effort.


«on посыльного жарься
11.3.1. Генерал информатион
on посыльного нападающего»
11.3.3. Removal and инсталляция of a бар of the жарься stabilizer