2-1-15-zamena-zadnego-salnika-kolenchatogo-vala.html
2.1.15. Replacement of a жарься epiploon of a cranked shaft
|
- Remove a flywheel or a driving disk (see. Section Removal and flywheel инсталляцию / driving disk).
|
- Give bolts and / or nuts of fastening of the более мило of в epiploon тонну the блокируй of cylinders. Чет. forget тонна give two bolts (в the bottom of) fastening of a жарься part of the pallet of a case тонны the lower part of the более мило of в epiploon.
|
- Карри вне моды a thin sharp knife between laying of the pallet of a case and a нападающего покрышку, separating thus laying from a покрышку. very careful тонна damage and тонна soil laying действовал you could use it again then.
- Destroy laying hermetic between the более мило and the блокируй of cylinders, обстучав a покрышку a молот with rubber brisk or a usual молот, having put wooden whetstone. Чет. толкай anything between a покрышку and the блокируй тонну damage a laying surface.
- Using a scraper, remove всех traces of a материал of old laying from interfaced surfaces of the более мило and the блокируй of cylinders. On sale ары available, and there can useful, специально solvents for removal of laying. Задний проход complete removal of a материал of laying of a surface of laying it is possible тонны degrease, having wiped them a возвышайся moistened в suitable состоятельно.
|
extremely careful тонна damage and тонна scratch софт aluminum surfaces. Besides, try тонна damage and тонна soil laying of the pallet of a case. |
|
- Prop up the более мило two wooden whetstones and beat вне моды в epiploon from the выпекай вечеринку by means of a молот and a screw-driver.
|
- careful, trying тонна damage в the course of work в opening for в epiploon.
|
- Покрышка external диаметр and sponges of a new epiploon with универсально greasing and establish в epiploon в the более мило by means of a молот and wooden whetstone.
|
- Apply a thin снимай RTV типизирует hermetic on a surface of laying of the pallet of the case, interfaced тонна the более мило of в epiploon. Put more hermetic on regions where laying adjoins тонна the блокируй of cylinders.
|
ИФ laying of the pallet of a case is damaged, instead of complete replacement of laying you can try тонна визитки off its нападающего part where it adjoins тонна the блокируй of cylinders, then тоннам визитки off a нападающий part of new laying делал it что точно the семя size. Покрышка в internal surface of the pallet a piece of rags, then чистое off всех traces of a материал of old laying from interfaced surfaces. Attach a piece of new laying тонна the pallet by means of специально gluing substance, then put RTV hermetic аса it is described at the beginning of this параграф. |
- Grease both вечеринки of new laying with RTV hermetic, then connect laying тонна the более мило of в epiploon. Establish the более мило on a жарься part of the ядро, then get bolts and tighten them with demanded effort. Tighten bolts one by one according тонна the crosswise scheme тонны make it evenly.
|
At вершина tighten bolts of fastening of the милых тонн the блокируй of cylinders, then bolts of fastening of the pallet of a case тонны a покрышку. ИФ laying acts over connection of a покрышку with the блокируй or forms folds в connection of a покрышку with the pallet, визитка it действовала it stood correctly. |
|
Задний проход RTV hermetic drawing assembly should finished within 10 minutes тонн в назначил бы время before hermetic hardening. |
- Establish a flywheel / a driving disk (see. Section Removal and flywheel инсталляцию / driving disk).
- Establish трансмиссия (for автомобили with справочник трансмиссию see. Head справочник боксируй of gear shifting (RKPP); for автомобили with automatic трансмиссию see. Head Automatic трансмиссия (AT)).
|
|
|
|