Removal, installation and door adjustment. BMW the 5th E28/E34 series (from 1981 to 1993 of release)
Repair of BMW E28 and series E34 from 1981 to 1993
1. Cars of the BMW brand of 5-series
2. Engine
3. Cooling system
4. Power supply system
5. Ignition system
6. Control systems of the engine and decrease in toxicity of the fulfilled gases
7. System of production of the fulfilled gases
8. Coupling
9. Manual box of gear shifting (RKPP) and automatic transmission (AT)
10. Transmission line
11. Steering and suspension bracket
12. Brake system
13. Body
13.1. Removal and front grille installation
13.2. Removal, installation and cowl adjustment
13.3. Removal and installation of bumpers
13.4. Removal and installation of the panel of an internal covering of doors
13.5. Removal, installation and door adjustment
13.6. Removal, installation and adjustment of a trunk lid / door of a back
13.7. Removal, installation and adjustment of a latch, cylinder of the lock and door handles
13.8. Removal and installation of glass of a door
13.9. Removal and installation of a window regulator of a door
13.10. Removal and installation of an external mirror
13.11. Removal and installation of casings of a steering column
13.12. Removal and installation of seats
13.13. Check of seat belts
13.14. Care of the car and coloring
14. Control body sizes
15. Heater and air conditioner
16. System of onboard electric equipment
17. Routine maintenance of the car
18. Size table and adjusting data
19. Schematic electric circuits
20. Governing bodies and operation receptions
21. System of onboard diagnostics - a principle of functioning and codes of malfunctions
 








13-5-snyatie-ustanovka-i-regulirovka-dveri.html

13.5. Removal, installation and door adjustment

Removal

 PERFORMANCE ORDER

  1. Remove the panel of a covering of doors (see. Section Removal and installation of the panel of an internal covering of doors). Disconnect all electric sockets and push them in a door opening that they did not disturb door removal.
  2. Prop up a door a jack on wheels or an axial support, it is possible to ask to support the assistant a door during return of bolts of loops.

When using a jack or a support enclose under a door a piece of rags to protect the painted surfaces.

  1. Lead round a marker or a chertilka door loops.
  1. Disconnect a control loop of a door, having hooked a lock ring since the pin end, then pull out a pin. On some models the cylindrical pin is established; it is taken with the help a small beard with a thin sting.
  1. Give nuts of fastening of loops to a door and accurately remove a door from loops.

Installation and adjustment

 PERFORMANCE ORDER

  1. Installation make upside-down.
  2. After installation of a door check, how exactly it costs and if necessary adjust it in the following order:
    • Vertical and horizontal adjustment is made after holiday of nuts of fastening of loops to a body by moving of doors necessarily.
    • The drummer of the lock of a door can be adjusted both vertically, and it is horizontal to provide reliable gearing with the lock mechanism. Fixing bolts and the drummer are for this purpose released moves necessarily.


«on page back
13.4. Removal and installation of the panel of an internal covering of doors
on page forward»
13.6. Removal, installation and adjustment of a trunk lid / door of a back