Body. BMW the 5th E28/E34 series (from 1981 to 1993 of release)
Repair of BMW E28 and series E34 from 1981 to 1993
1. Cars of the BMW brand of 5-series
2. Engine
3. Cooling system
4. Power supply system
5. Ignition system
6. Control systems of the engine and decrease in toxicity of the fulfilled gases
7. System of production of the fulfilled gases
8. Coupling
9. Manual box of gear shifting (RKPP) and automatic transmission (AT)
10. Transmission line
11. Steering and suspension bracket
12. Brake system
13. Body
13.1. Removal and front grille installation
13.2. Removal, installation and cowl adjustment
13.3. Removal and installation of bumpers
13.4. Removal and installation of the panel of an internal covering of doors
13.5. Removal, installation and door adjustment
13.6. Removal, installation and adjustment of a trunk lid / door of a back
13.7. Removal, installation and adjustment of a latch, cylinder of the lock and door handles
13.8. Removal and installation of glass of a door
13.9. Removal and installation of a window regulator of a door
13.10. Removal and installation of an external mirror
13.11. Removal and installation of casings of a steering column
13.12. Removal and installation of seats
13.13. Check of seat belts
13.14. Care of the car and coloring
14. Control body sizes
15. Heater and air conditioner
16. System of onboard electric equipment
17. Routine maintenance of the car
18. Size table and adjusting data
19. Schematic electric circuits
20. Governing bodies and operation receptions
21. System of onboard diagnostics - a principle of functioning and codes of malfunctions

Взято с сайта


13. Body

Removal and front grille installation

E28 models ("retro")


  1. Give screws and remove central and lateral parts of a lattice.
  2. Installation make upside-down.

E34 models (modern body)

Central lattice


  1. Give screws and remove covers of head headlights in an impellent compartment to provide access.
  2. Give the screw and remove a plastic cover behind the central lattice to provide access to clips.
  1. From an impellent compartment disconnect fixing clips of furnish of the central lattice, being under casings of head headlights, then вытолкните a lattice forward.
  1. By means of a screw-driver wring out clips, disconnect assembly of a lattice and remove it, having pulled out directly outside.
  2. Establish the central lattice, having placed it on a place and having pushed inside so that clips were latched.

Lateral lattice


  1. Remove the central lattice.
  1. Give screws and pull out a lateral lattice.
  1. Installation make upside-down.

«on page back
12.17. Diagnostics of malfunctions of brake system
on page forward»
13.1. Removal and front grille installation