Check and replacement of support of transmission. BMW the 5th E28/E34 series (from 1981 to 1993 of release)
Repair of BMW E28 and series E34 from 1981 to 1993
1. Cars of the BMW brand of 5-series
2. Engine
3. Cooling system
4. Power supply system
5. Ignition system
6. Control systems of the engine and decrease in toxicity of the fulfilled gases
7. System of production of the fulfilled gases
8. Coupling
9. Manual box of gear shifting (RKPP) and automatic transmission (AT)
9.1. Manual box of gear shifting (RKPP)
9.1.1. General information
9.1.2. Removal and installation of the lever of the switch
9.1.3. Replacement of epiploons
9.1.4. Check and replacement of support of transmission
9.1.5. Removal and transmission installation
9.1.6. General information about major maintenance of transmission
9.1.7. Diagnostics of malfunctions of manual transmission
9.2. Automatic transmission (AT)
10. Transmission line
11. Steering and suspension bracket
12. Brake system
13. Body
14. Control body sizes
15. Heater and air conditioner
16. System of onboard electric equipment
17. Routine maintenance of the car
18. Size table and adjusting data
19. Schematic electric circuits
20. Governing bodies and operation receptions
21. System of onboard diagnostics - a principle of functioning and codes of malfunctions


9.1.4. Check and replacement of support of transmission


  1. Lift the car and establish it on supports. Insert over a support under a back part of a case of transmission a big screw-driver or the lever. Try to raise transmission a little.
  1. Transmission should rise a little. If it moves easily, that, probably, the support burst or is torn. Replace it.
  2. For support replacement at first support weight of transmission by a roller jack. Unscrew nuts and bolts of fastening of a support to a cross-piece and to transmission, then lift transmission a little and remove a support.
  3. Installation is return to removal.

«on page back
9.1.3. Replacement of epiploons
on page forward»
9.1.5. Removal and transmission installation