|
16-23-zamena-lamp-v-golovnykh-farakh.html
16.23. Replacement of lamps in head headlights
Disconnect a negative wire of the battery.
Not folding (pressurized) lamps
|
|
- Remove a front grille (see. Head Body).
- Give screws of fastening of a head headlight, trying not to damage adjusting screws.
- Remove the holder and вытолкните a headlight outside so that it was possible to separate the socket.
- Remove a head headlight.
- For installation of a head headlight connect the socket, establish a headlight on a place and insert fixing screws. Reliably tighten screws.
- Establish a front grille. Connect a negative wire of the battery.
|
|
Galogenovye of a lamp
|
|
The lamps filled with halogen, are under pressure and can scatter into smithereens. If to scratch their surface or to drop. Put on goggles and address with these lamps very carefully, whenever possible taking them for a socle. Do not touch a surface of lamps fingers since fat from your skin can serve as the reason of their overheat and premature failure. |
|
|
If all of you touched a lamp surface hands, wipe it methyl alcohol. |
|
|
- Remove an external cover of a headlight from the back party of assembly.
|
|
- Unscrew an internal cover from a back part of a headlight.
|
|
|
- Disconnect a wire from a back part of a lamp of a head headlight.
|
|
|
- Lower clips and take a lamp from the block of a head headlight. Do not touch a lamp surface fingers.
|
- Establish a new lamp as it should be, the return to removal. Make sure that clips hold a lamp.
- Connect a negative wire of the battery.
|
|
|
|