Replacement of lateral epiploons of a case of differential. BMW the 5th E28/E34 series (from 1981 to 1993 of release)
Repair of BMW E28 and series E34 from 1981 to 1993
1. Cars of the BMW brand of 5-series
2. Engine
3. Cooling system
4. Power supply system
5. Ignition system
6. Control systems of the engine and decrease in toxicity of the fulfilled gases
7. System of production of the fulfilled gases
8. Coupling
9. Manual box of gear shifting (RKPP) and automatic transmission (AT)
10. Transmission line
10.1. General information
10.2. Removal and driveshaft installation
10.3. Check of work and replacement of the elastic coupling
10.4. Check and replacement of the central bearing
10.5. Check and replacement of kardanny hinges
10.6. Check and replacement of a lobby of the centering directing
10.7. Replacement of the hinge of equal angular speeds of the driveshaft
10.8. Removal and installation of power shafts
10.9. Check and replacement of CV JOINTS and their protective covers
10.10. Replacement of lateral epiploons of a case of differential
10.11. Removal and installation of a casing of differential
10.12. Replacement of an epiploon of a gear wheel
11. Steering and suspension bracket
12. Brake system
13. Body
14. Control body sizes
15. Heater and air conditioner
16. System of onboard electric equipment
17. Routine maintenance of the car
18. Size table and adjusting data
19. Schematic electric circuits
20. Governing bodies and operation receptions
21. System of onboard diagnostics - a principle of functioning and codes of malfunctions
 








10-10-zamena-bokovykh-salnikov-kartera-differenciala.html

10.10. Replacement of lateral epiploons of a case of differential

 PERFORMANCE ORDER

  1. To Poddomkratta a back of the car and reliably establish it on axial support.
  2. Merge lubricant liquid of differential (see. Head Routine maintenance of the car).
  3. Separate a power shaft from differential (see. The section Removal and installation of power shafts) also suspend it on a piece of a wire away from a working zone. Do not leave it to hang without support since it can be damaged.
  1. By means of the suitable lever or a big screw-driver remove a flange from differential - be ready to pick up a flange when it will separate.
  1. Small screw-driver remove a lock ring of a flange.
  1. Examine a flange shaft. If on it the flute in a place of its contact to an epiploon was carried by, replace a flange.
  1. Take an old epiploon the special tool or a big screw-driver. Make sure that did not scratch an epiploon nest in a differential casing.
  1. Cover a new epiploon with lubricant liquid of differential, then by means of a big replaceable head or a piece of a pipe and a hammer establish an epiploon into place. Track, that the epiploon was established correctly (sponges inside).
  1. Insert a new lock ring into a flute. Track, that both its ends completely rose in a flute.
  2. Cover an epiploon sponge with greasing, a loan establish a differential flange. Push a flange inside, yet will not feel that the lock ring rose into place.
  3. The rest of procedure of installation also make as it should be, the return to removal.


«on page back
10.9. Check and replacement of CV JOINTS and their protective covers
on page forward»
10.11. Removal and installation of a casing of differential