Pumping of hydraulic system of the mechanism of hydrostrengthening of a wheel. BMW the 5th E28/E34 series (from 1981 to 1993 of release) xtrade
Repair of BMW E28 and series E34 from 1981 to 1993
1. Cars of the BMW brand of 5-series
2. Engine
3. Cooling system
4. Power supply system
5. Ignition system
6. Control systems of the engine and decrease in toxicity of the fulfilled gases
7. System of production of the fulfilled gases
8. Coupling
9. Manual box of gear shifting (RKPP) and automatic transmission (AT)
10. Transmission line
11. Steering and suspension bracket
11.1. Steering
11.1.1. General information
11.1.2. Removal and installation of tips of steering drafts
11.1.3. Replacement of rubber protective covers of the steering mechanism
11.1.4. Survey, removal and installation of a steering drive
11.1.5. Removal and installation of the steering mechanism
11.1.6. Removal and installation of the pump of the amplifier of a steering
11.1.7. Pumping of hydraulic system of the mechanism of hydrostrengthening of a wheel
11.1.8. Removal and installation of a steering wheel
11.1.9. General information on wheels and tires
11.1.10. General information on installation of corners of wheels and angles of rotation
11.1.11. Diagnostics of malfunctions of a suspension bracket and steering
11.2. Forward suspension bracket
11.3. Suspension bracket of back wheels
12. Brake system
13. Body
14. Control body sizes
15. Heater and air conditioner
16. System of onboard electric equipment
17. Routine maintenance of the car
18. Size table and adjusting data
19. Schematic electric circuits
20. Governing bodies and operation receptions
21. System of onboard diagnostics - a principle of functioning and codes of malfunctions
 








11-1-7-prokachka-gidravlicheskojj-sistemy-mekhanizma-gidrousileniya-rulya.html

11.1.7. Pumping of hydraulic system of the mechanism of hydrostrengthening of a wheel

 PERFORMANCE ORDER

  1. To pump over system of hydrostrengthening of a wheel, begin with check of level of liquid in the tank and its dolivka at need (see. Head Routine maintenance of the car).
  2. To Poddomkratta a front of the car and reliably establish it on axial support.
  3. Turn a steering wheel from an emphasis against the stop several times. Again check level of liquid and add it if it is necessary.
  4. Turn on the engine and let's to it work at no more than 1000 rpm. Again turn a steering wheel from an emphasis against the stop (three-four times) and once again check liquid level.

On the E28 models ("retro") before turning a steering wheel, squeeze out a brake pedal five-six times. When level of liquid will cease to decrease, continue to turn a wheel from an emphasis against the stop until in liquid air vials will not cease to appear.

  1. Lower the car on the earth. Turn on the engine and again several times turn wheels from an emphasis against the stop. Check liquid level. Establish wheels in situation directly forward.


«on page back
11.1.6. Removal and installation of the pump of the amplifier of a steering
on page forward»
11.1.8. Removal and installation of a steering wheel