16-17-snyatie-i-ustanovka-vyklyuchatelejj-na-rulevojj-kolonke.html
16.17. Removal and installation of switches on a steering column
|
Some of latest models are equipped with a pneumopillow, or Auxiliary System of Safety (SRS). To avoid possible damages of this system, the producer recommends for models with a pneumopillow to provide the procedure of competence of dealer office of service described below or a repair truck since she demands use of the special equipment and technologies. There is also a danger of traumas in case the mechanism of a pneumosafety cushion casually works. |
Disconnect a negative wire of the battery, remove a steering wheel (see. Head the Steering) and casings of a steering column (see. Head Body).
Switch of the index of turn / head headlights
|
|
- Where it is necessary, give screws of fastening of the switch. Compress uvulas and pull out the switch from fastening of a steering column.
|
|
- Go down on switch wires down on a steering column to the electric socket and disconnect wires.
|
- Installation make upside-down.
|
|
Screen wiper/washer switch
|
- Where it is necessary, give screws of fastening of the switch.
|
- Squeeze out a fixing clip and remove the switch from fastening of a steering column. Go down on switch wires down to the socket and disconnect wires.
|
- Installation make upside-down.
|
|
Switch of a control system in the speed
|
- Remove the screen wiper/washer switch.
|
- Where it is necessary, give the screw of fastening of the switch. Compress fixing uvulas and pull out the switch from fastening.
|
- Disconnect the electric socket of the switch from conducting in the basis of a steering column.
- Installation make upside-down.
|
|
|
|