Removal and generator installation. BMW the 5th E28/E34 series (from 1981 to 1993 of release) . .
Repair of BMW E28 and series E34 from 1981 to 1993
1. Cars of the BMW brand of 5-series
2. Engine
3. Cooling system
4. Power supply system
5. Ignition system
6. Control systems of the engine and decrease in toxicity of the fulfilled gases
7. System of production of the fulfilled gases
8. Coupling
9. Manual box of gear shifting (RKPP) and automatic transmission (AT)
10. Transmission line
11. Steering and suspension bracket
12. Brake system
13. Body
14. Control body sizes
15. Heater and air conditioner
16. System of onboard electric equipment
16.1. General information
16.2. The general information on search of malfunctions in electric chains
16.3. Removal and installation of the storage battery
16.4. Check of a condition and replacement of wires of the battery
16.5. General information on safety locks
16.6. General information on the relay
16.7. General information about charge and precautionary measure system at work with it
16.8. Check of system of a charge
16.9. Removal and generator installation
16.10. Replacement of a regulator of tension
16.11. Check and replacement of brushes of the generator
16.12. General information about system of start of the engine and a precautionary measure
16.13. Starter check on the car
16.14. Removal and starter installation
16.15. Removal and installation of the traction relay
16.16. Check and replacement of breakers of indexes of turn and alarm system
16.17. Removal and installation of switches on a steering column
16.18. Removal and installation of the lock of ignition
16.19. Removal and radio receiver installation
16.20. Removal and aerial installation
16.21. Removal and installation of components of an instrument guard
16.22. General information on the panel of alarm lamps of a reminder on term of service (SI)
16.23. Replacement of lamps in head headlights
16.24. Adjustment of a beam of head headlights
16.25. Removal and installation of the case of a head headlight
16.26. Replacement of lamps
16.27. Removal and installation of the motor of a screen wiper of windscreen / glass of a door of a back
16.28. Check of work and repair of a heater of back glass
16.29. General information on auxiliary system of safety (SRS)
16.30. Description and check of work of a control system by speed (темпостата)
16.31. Description and check of work of system of the central blocking of doors
16.32. Description and check of work of system of electric window regulators
16.33. Diagnostics of malfunctions of a suspension bracket of back wheels
17. Routine maintenance of the car
18. Size table and adjusting data
19. Schematic electric circuits
20. Governing bodies and operation receptions
21. System of onboard diagnostics - a principle of functioning and codes of malfunctions
 








16-9-snyatie-i-ustanovka-generatora.html

16.9. Removal and generator installation

If the radio receiver on your car is equipped with system of protection against abduction, before shutdown of the storage battery be convinced that the correct code of activization is known. Before a detachment of a wire apply for information to the Section System of protection of an audiosystem from theft and language of an instrument guard.


If after battery connection on a disk of the dashboard there is a message in other language, for procedure of installation of language address to the Section System of protection of an audiosystem from theft and language of an instrument guard.

Removal

 PERFORMANCE ORDER

  1. Disconnect a negative wire of the storage battery.
  1. Disconnect from the generator electric sockets, having remembered their arrangement. Depending on quantity of the equipment on the car it can sometimes appear simpler at first to remove the generator from arms, and then, having turned aside, to provide access to sockets (are shown by shooters), located on a back wall of the generator.

On some models for receiving access to the generator it can be demanded to remove an air purifier and a measuring instrument of a stream of air.

  1. Weaken adjusting and fixing bolts of the generator and remove a driving belt (look Head Routine maintenance of the car).
  2. Remove adjusting and fixing bolts and separate the generator from the engine.

Installation

If generator replacement, that is made, getting new or restored, take with itself the former generator. Be convinced that the new generator is identical to the old. Pay attention to contacts - them should be as much, they should have the same sockets and an arrangement, as on the former generator. At last, pay attention to identification numbers - they штампованы on the case or are printed on a label fixed on the case. Be convinced that on both generators of number identical.

Many new generators are not completed with a pulley therefore it can be demanded to rearrange a pulley from the former generator on the new.

 PERFORMANCE ORDER

  1. Installation is return to removal.
  2. After installation of the generator pull a driving belt (look Head Routine maintenance of the car). Check tension of a charge to be convinced of the correct operation of the generator (look the Section Check of system of a charge).


«on page back
16.8. Check of system of a charge
on page forward»
16.10. Replacement of a regulator of tension