Check of fuel system. BMW the 5th E28/E34 series (from 1981 to 1993 of release)
Repair of BMW E28 and series E34 from 1981 to 1993
1. Cars of the BMW brand of 5-series
2. Engine
3. Cooling system
4. Power supply system
5. Ignition system
6. Control systems of the engine and decrease in toxicity of the fulfilled gases
7. System of production of the fulfilled gases
8. Coupling
9. Manual box of gear shifting (RKPP) and automatic transmission (AT)
10. Transmission line
11. Steering and suspension bracket
12. Brake system
13. Body
14. Control body sizes
15. Heater and air conditioner
16. System of onboard electric equipment
17. Routine maintenance of the car
17.1. Schedule of routine maintenance
17.2. Introduction
17.3. Current leaving
17.4. General information on control
17.5. Check of levels of liquids
17.6. Check of a condition of tires and pressure in them
17.7. Replacement of impellent oil and oil filter
17.8. Check of level of liquid of system of hydrostrengthening of a wheel
17.9. Check of level of lubricant liquid of automatic transmission
17.10. Rotation of wheels
17.11. Check of a condition and replacement of hoses of an impellent compartment
17.12. Condition check, adjustment of a tension and replacement of driving belts
17.13. Check and adjustment of turns of idling of the engine and level WITH
17.14. Check of a condition of the battery, care of it and charging
17.15. Check and replacement of spark plugs
17.16. Check and replacement of candle VV of wires, covers and distributor begunka
17.17. Check of level of oil in a manual box of gear shifting
17.18. Check of level of lubricant liquid of differential
17.19. Check and adjustment of gaps of valves
17.20. Check and greasing of draft of a drive of a butterfly valve
17.21. Replacement of the air filter
17.22. Check of fuel system
17.23. Check of functioning of system of cooling
17.24. Check of a condition of system of production of the fulfilled gases
17.25. Check of a condition of components of a suspension bracket and steering
17.26. Check of a condition of protective covers of power shafts
17.27. Check of brake system
17.28. Check of a condition and replacement of brushes of screen wipers
17.29. Replacement of transmission liquid and AT filter
17.30. Plums, washing and filling of system of cooling
17.31. Replacement of the fuel filter
17.32. Replacement of transmission oil of manual transmission
17.33. Replacement of lubricant liquid of differential
17.34. Check of functioning of system of catching паров gasoline (EVAP)
17.35. Control of an alarm lamp of the notification about approach of term of planned maintenance (SPTO)
17.36. Replacement of a distributive belt of the engine
18. Size table and adjusting data
19. Schematic electric circuits
20. Governing bodies and operation receptions
21. System of onboard diagnostics - a principle of functioning and codes of malfunctions
 













17-22-proverka-toplivnojj-sistemy.html

17.22. Check of fuel system

Annually or each 20 000 km of run

Gasoline is extremely inflammable therefore at work with any components of fuel system it is necessary to accept special precautionary measures. Do not smoke and do not come nearer to a venue of works with open fire or unprotected by the lamp shade carrying. Do not perform such works in the garages equipped with heating devices, working at natural gas (such, as водогреи, dryers, etc.). The working platform should be ventilated well. At gasoline hit on skin immediately wash away it water with soap. At carrying out any works with fuel system put on goggles and hold near at hand the fire extinguisher. In case of a gasoline spillage immediately wipe a pool, but do not keep the rags impregnated with gasoline in places where it can самовоспламениться.


 PERFORMANCE ORDER

  1. If you felt a gasoline smell during movement or after the car stood on the sun, it is necessary to check a condition of all fuel system immediately.
  2. Uncover a fuel tank and check it on existence of damages and corrosion. The sealing insert on a cover should be complete. In case of existence of damages or corrosion replace a cover.
  3. Survey inlet and returnable lines of fuel system on existence of cracks. Make sure that connections between lines of fuel system and the carburetor or system of injection of fuel, and also between lines of fuel system and the built-in fuel filter did not weaken.

On the cars equipped with system of injection of fuel before serving fuel hoses, it is necessary to dump pressure in system. For instructions address to Head the Power supply system.

  1. As some components of fuel system - for example, a fuel tank and some lines of fuel system - are in the lower part of the car, they are easier for examining, when the car is raised by the winch. If it is impossible, поддомкратьте the car and establish it on axial support.
  2. On the raised car examine a fuel tank and a bulk mouth on existence of holes, cracks and other damages. Special attention give to a connection condition between a bulk mouth and a tank. Sometimes leakages of fuel occur owing to weakening of collars of fastening of a rubber mouth or because of damage of a material of a mouth. Examine all arms and tapes of fastening of a fuel tank to make sure that it is reliably strengthened on the car.

Never, under no circumstances, try to repair a fuel tank (excepting replacement of its rubber components). A flame of the welding device or any other opened fire easily can lead to explosion of evaporations of gasoline in a tank.

  1. Carefully check all fuel hoses and the metal lines going from a tank on existence of weakened connections, twisting, signs of wear of materials of hoses and other damages. If necessary make repair or replace the damaged sections (see. Head Power supply system).


«on page back
17.21. Replacement of the air filter
on page forward»
17.23. Check of functioning of system of cooling