Check of functioning of system of cooling. BMW the 5th E28/E34 series (from 1981 to 1993 of release)
Repair of BMW E28 and series E34 from 1981 to 1993
1. Cars of the BMW brand of 5-series
2. Engine
3. Cooling system
4. Power supply system
5. Ignition system
6. Control systems of the engine and decrease in toxicity of the fulfilled gases
7. System of production of the fulfilled gases
8. Coupling
9. Manual box of gear shifting (RKPP) and automatic transmission (AT)
10. Transmission line
11. Steering and suspension bracket
12. Brake system
13. Body
14. Control body sizes
15. Heater and air conditioner
16. System of onboard electric equipment
17. Routine maintenance of the car
17.1. Schedule of routine maintenance
17.2. Introduction
17.3. Current leaving
17.4. General information on control
17.5. Check of levels of liquids
17.6. Check of a condition of tires and pressure in them
17.7. Replacement of impellent oil and oil filter
17.8. Check of level of liquid of system of hydrostrengthening of a wheel
17.9. Check of level of lubricant liquid of automatic transmission
17.10. Rotation of wheels
17.11. Check of a condition and replacement of hoses of an impellent compartment
17.12. Condition check, adjustment of a tension and replacement of driving belts
17.13. Check and adjustment of turns of idling of the engine and level WITH
17.14. Check of a condition of the battery, care of it and charging
17.15. Check and replacement of spark plugs
17.16. Check and replacement of candle VV of wires, covers and distributor begunka
17.17. Check of level of oil in a manual box of gear shifting
17.18. Check of level of lubricant liquid of differential
17.19. Check and adjustment of gaps of valves
17.20. Check and greasing of draft of a drive of a butterfly valve
17.21. Replacement of the air filter
17.22. Check of fuel system
17.23. Check of functioning of system of cooling
17.24. Check of a condition of system of production of the fulfilled gases
17.25. Check of a condition of components of a suspension bracket and steering
17.26. Check of a condition of protective covers of power shafts
17.27. Check of brake system
17.28. Check of a condition and replacement of brushes of screen wipers
17.29. Replacement of transmission liquid and AT filter
17.30. Plums, washing and filling of system of cooling
17.31. Replacement of the fuel filter
17.32. Replacement of transmission oil of manual transmission
17.33. Replacement of lubricant liquid of differential
17.34. Check of functioning of system of catching паров gasoline (EVAP)
17.35. Control of an alarm lamp of the notification about approach of term of planned maintenance (SPTO)
17.36. Replacement of a distributive belt of the engine
18. Size table and adjusting data
19. Schematic electric circuits
20. Governing bodies and operation receptions
21. System of onboard diagnostics - a principle of functioning and codes of malfunctions
 






17-23-proverka-funkcionirovaniya-sistemy-okhlazhdeniya.html

17.23. Check of functioning of system of cooling

Annually or each 20 000 km of run

Many serious violations in operation of the engine are connected with malfunctions of system of cooling. If the car is equipped with automatic transmission, its functioning and service life also are directly connected with work of system of cooling.

Check of system of cooling should be made at the cold engine therefore it is better to be engaged in it before the first trip for the present day or not earlier than in three hours after engine switching off.

 PERFORMANCE ORDER

  1. Slowly, being careful in case the engine yet absolutely cooled down, uncover a radiator. Carefully wash out it from within and outside pure water. Also wash out a jellied mouth of a radiator. Existence of traces of corrosion in a jellied mouth means that it is necessary to replace a cooler (see. Section Plums, washing and filling of system of cooling). The cooler in a radiator should be rather pure and transparent. If it has brownish color, drain system and fill in in it a new cooler.
  1. Carefully check radiator hoses, and also hoses of a heater which have smaller diameter. Check hoses of system of cooling on all length, making replacement of any burst, blown-up or worn-out hose. Cracks are easier for finding if to compress a hose a hand. Pay special attention to the collars holding hoses on components of system of cooling. These collars can cut or pierce hoses that will lead to leakage of a cooler.
  1. Make sure of reliability of fastening of all shlangovy connections. Leakages of a cooler are usually shown in the form of white or rusty color of deposits in the field of sealing violation. If on your car collars of wire type are used, it is possible, there is a sense to replace them with collars of screw type.
  2. By means of the compressed air or a soft brush clear a forward part of a radiator (and also the condenser of the conditioner of air where it is available). Remove all insects, leaves and the other extraneous subjects which have got on edges of a radiator. Be very careful not to injure an edge and not to cut about them fingers.
  3. If cooler level constantly falls, and you did not find any leaks, it is necessary to make check by pressure of a cover of a radiator and all cooling system.

«on page back
17.22. Check of fuel system		 on page forward»
17.24. Check of a condition of system of production of the fulfilled gases